Tapo D205 Not Detecting Motion? Here’s How to Fix It
Tapo cameras trigger alerts and recordings from motion detection. If you are not getting alerts, it is usually a setting, a detection zone or placement.
What This Problem Means
If your Tapo D205 is showing this fault, working through the checks below in order resolves it in the large majority of cases. Each step is safe to try yourself and follows TP-Link’s official Tapo guidance.
Common Symptoms
- No motion notifications
- Events missed
- No clips saved after movement
- Only some movement detected
Safe Checks You Can Try
1. Check detection is on
In Device Settings, make sure Detection and Notifications (motion detection) are switched on.
2. Raise the sensitivity
Increase the motion sensitivity so smaller movements register.
3. Review your Activity Zones
Make sure the area you care about is not excluded by a detection zone.
4. Check notification settings
Confirm push notifications are enabled for the camera in the app and on your phone.
5. Reposition the camera
Mount it so movement crosses the view rather than coming straight on, and avoid pointing through glass.
As an Amazon Associate I earn from qualifying purchases.
When To Contact Support
If you have worked through every step and your Tapo D205 still has this problem, the hardware may need attention. Visit TP-Link support for further help or to arrange a replacement if it is in warranty.