Aqara Camera G100 Keeps Disconnecting

Step-by-step fix guide | Aqara Camera G100

Try this first — Restart your router by unplugging it for about a minute, and move anything metal or any microwave or cordless phone away from the camera and router.

Is your Aqara Camera G100 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

The Aqara Camera G100 keeps dropping its connection and coming back. Weak signal, interference and an overloaded network are the usual causes.

Common Symptoms

  • The camera goes offline then comes back on its own
  • Live view cuts out or buffers
  • Alerts arrive late or are missed
  • Recordings have gaps

Safe Checks You Can Try

1. Check the signal and placement

Aqara suggests keeping cameras and routers away from thick walls, large metal objects, microwaves and cordless phones, and aiming for a clear line between them. If the signal is still weak, Aqara mentions a Wi-Fi extender or a mesh system.

2. Check the Wi-Fi band

The G100 only connects to 2.4GHz Wi-Fi, so make sure your router is broadcasting a 2.4GHz network.

3. Reduce the load on your network

Pause large downloads and streaming for a few minutes. If your router has Quality of Service (QoS) settings, Aqara suggests using them to prioritise camera traffic.

4. Check the power

The G100 needs a 5V 1A input. Aqara says to use an adapter rated at 5V 1A or more. A loose plug or an under-rated adapter is a common cause of drop-outs.

5. Restart the router

Aqara’s advice is to unplug your router and modem, wait about a minute, then plug them back in. It can take a few minutes for full speed to return.

6. Check for a firmware update

Open the camera in the Aqara Home app and look for a firmware update in its settings. Leave it powered on until the update finishes.

7. Check for an IP address clash

Aqara lists two devices sharing an IP address as one cause of a camera dropping offline. Giving the camera a fixed (static) IP address in your router’s settings fixes this.

Helpful accessory: Find the Aqara Camera G100
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and you can also send feedback from the Aqara Home app. Have your proof of purchase ready in case a repair or replacement is needed.

Last resort: factory reset. Aqara’s manual says pressing the reset button 10 times in a row restores factory settings. You will need to add the G100 to the Aqara Home app again. Only do this if the steps above have not worked.