Aqara Hub E1 Devices Keep Going Offline: How to Fix It

Step-by-step fix guide | Aqara Hub E1

Try this first — Check the hub is online, then move the device closer to the hub and replace its battery if it is low.

Is your Aqara Hub E1 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

Sensors or switches connected to the Aqara Hub E1 keep going offline or stop responding. Distance, obstructions and batteries are the usual causes.

Common Symptoms

  • Devices show offline in the app
  • Sensors stop reporting
  • Automations do not fire
  • Devices come and go

Safe Checks You Can Try

1. Check the hub itself is online

If the hub is offline, restart it first. Only move on once the hub shows online.

2. Move the device closer

Aqara recommends keeping devices within a maximum of 10 metres, with no more than two walls of the hub, and avoiding metal obstructions.

3. Replace the device’s battery

A low or flat battery is a common cause of devices dropping off. Replace it.

4. Add repeaters

Mains-powered Aqara devices such as wall switches with neutral or smart plugs act as Zigbee repeaters and extend range.

5. Update the firmware

Update the hub and the device firmware in the Aqara Home app.

Helpful accessory: Find the Aqara Hub E1
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.

Related Guides