Plug-in USB hub | Zigbee + Thread | Matter controller and Thread border router | Wi-Fi 6 (2.4GHz)
Overview
The Aqara Hub M100 is a small USB-A hub that plugs straight into a socket adapter, power strip or router. It is a Matter controller and Thread border router, runs Aqara Zigbee and Thread devices locally, and bridges Aqara devices into Apple Home, Alexa, Google Home, SmartThings and Home Assistant. It connects over 2.4GHz Wi-Fi 6.
Ad: we earn commission if you buy through the price buttons on this page.
Key Features
Pros & Cons
Pros
Cons
Setup & Installation
Plug the M100 into a USB-A port rated above 2.5W. When the light flashes yellow it is in pairing mode; add it with Add Accessory in the Aqara Home app. If your network changes, hold the button for 10 seconds until the light flashes yellow and set it up again.
Keep child devices within about 10 metres of the hub, with no more than two concrete walls in between. For Apple Home remote control you need a HomePod or Apple TV set as a home hub.
Common Problems & Fixes
Running into issues? Our Aqara Hub M100 troubleshooting guide covers step-by-step fixes for the common faults. Popular guides: won’t connect to wi-fi, devices keep going offline, won’t add to apple home.
Who Should Buy It
Anyone starting out with Aqara or adding Thread and Matter to a small home, who wants a hub that hides away in a USB port.
Verdict
The M100 is a neat, simple way into Aqara with Thread and Matter included. Its 40-device limit (20 Zigbee) and lack of a speaker make it a starter or secondary hub rather than the centre of a big setup.
As an affiliate, we may earn a commission from qualifying Aqara purchases.
Related Guides
