Aqara Hub M200 Reset by Accident: How to Fix It

Step-by-step fix guide | Aqara Hub M200

Try this first — Turn on Accidental Removal Protection in the M200’s device settings in the Aqara Home app.

Is your Aqara Hub M200 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

The Hub M200 has been reset or unbound by an accidental button press.

Common Symptoms

  • The hub has lost its setup
  • Devices need adding again
  • The light flashes yellow unexpectedly

Safe Checks You Can Try

1. Turn on Accidental Removal Protection

Aqara says this blocks resets from accidental button presses. Once on, the hub can only be unbound in the app.

2. Know the button presses

Aqara’s manual says holding the button for 10 seconds resets the network and unbinds child devices, and pressing it 10 times quickly restores factory settings.

3. Set it up again

If it has been reset, wait for the yellow light to flash and add it again in the Aqara Home app.

Helpful accessory: Find the Aqara Hub M200
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.