Step-by-step fix guide | Aqara Motion and Light Sensor P2
Is your Aqara Motion and Light Sensor P2 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.
What This Problem Means
The Aqara Motion and Light Sensor P2 will not pair. Aqara lists the setup steps, distance and the type of hub as the usual causes.
Common Symptoms
- The app cannot find the sensor
- Pairing fails part-way through
- The sensor adds but shows offline straight away
Safe Checks You Can Try
1. Check you have a Thread border router
This is a Thread device. Aqara says it needs a Matter controller and Thread border router, such as the Hub M3, and is not compatible with Aqara hubs E1, M1S, M2, G2H or G3.
2. Add it again
Aqara’s first suggestion is to repeat the adding steps. In the Aqara Home app tap + and add the sensor again, keeping it near the hub.
3. Move it closer
Aqara lists distance from the hub or border router as a main cause. Move the sensor closer and reduce walls and obstacles in between.
4. Update your apps and border router
Aqara suggests updating the Home app, restarting your iPhone and updating the border router to the latest version.
5. Reset and pair again
Hold the button for 5 seconds until the light flashes fast, then release within 3 seconds. Then add it again in the Aqara Home app.
We may earn a commission from Aqara purchases made through links on this page.
When To Contact Support
If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.
Related Guides
