Aqara Radiator Thermostat W600 Showing F1 or F2: How to Fix It

Step-by-step fix guide | Aqara Radiator Thermostat W600

Try this first — F1 means it is waiting to be fitted. Fit it to the valve, then press the button three times to calibrate.

Is your Aqara Radiator Thermostat W600 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

The Radiator Thermostat W600 shows F1 or F2 on its screen.

Common Symptoms

  • F1 on the screen
  • F2 on the screen for a few minutes

Safe Checks You Can Try

1. F1: finish fitting it

Aqara says F1 is pre-installation. Fit it to the valve, then press the button three times in a row to start calibration.

2. F2: wait for calibration

Aqara says F2 is calibration and takes about 1 to 3 minutes. Leave it until the set temperature returns.

3. If F1 does not appear

Aqara’s manual says to press and hold the button for 10 seconds to reset.

Helpful accessory: Find the Aqara Radiator Thermostat W600
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.