Aqara Shutter Switch H2 Percentage Control Not Working: How to Fix It

Step-by-step fix guide | Aqara Shutter Switch H2

Try this first — Run Smart Calibration: double-press Up, then double-press Down.

Is your Aqara Shutter Switch H2 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself, and any wiring checks are flagged for an electrician.

What This Problem Means

The Shutter Switch H2 will not move the shutter to a set percentage.

Common Symptoms

  • Only hold-to-move works
  • Positions are wrong

Safe Checks You Can Try

1. Calibrate it

Aqara says Smart Calibration is required for percentage control. Double-press Up, then double-press Down; the shutter goes to the top, the bottom and back to the top.

2. Clear and start again

Press Down five times to clear the travel data, then run Smart Calibration again.

3. Recalibrate after drift

Aqara says calibration can drift over time, so recalibrate based on how much you use it.

Helpful accessory: Find the Aqara Shutter Switch H2
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.