Aqara Smart Lock | UK 2026
Aqara Smart Rim Lock U500 Review

Surface-mounted rim lock | Fingerprint + PIN + NFC + Apple Home Key | Matter over Thread | 4 AA batteries (up to 7 months, Aqara figure)

Overview

The Aqara Smart Rim Lock U500 is a surface-mounted smart lock that fits on the front and back of the door, so no mortise lock is needed. It has a fingerprint reader, a keypad, NFC, Apple Home Key, a built-in doorbell button and two mechanical keys.

It connects over Matter over Thread, Bluetooth and NFC, and works with Apple Home, Google Home, Alexa, SmartThings and Home Assistant. Basic features work locally in the Aqara Home app; remote control and automations need a Thread-enabled Matter controller.

Ad: we earn commission if you buy through the price buttons on this page.

Check latest price

Key Features

✓Fingerprint (up to 50), PIN (up to 75 in Aqara Home), NFC cards (up to 25) and Apple Home Key
✓Surface-mounted front and back, no mortise needed
✓Fits doors 20 to 60mm thick, backset 40 to 45mm
✓Matter over Thread, Bluetooth 5.3 and NFC (no Wi-Fi)
✓Four AA batteries, up to 7 months (Aqara figure)
✓Gyroscope auto-lock, Night Latch and Do Not Disturb
✓Built-in doorbell button
✓Outer panel IP65, inner panel IP54

Pros & Cons

Pros

+ No mortise needed; mounts on the surface of the door
+ Fingerprint, PIN, NFC and Apple Home Key
+ Matter over Thread with all the major platforms
+ Gyroscope auto-lock with no door sensor
+ Built-in doorbell button

Cons

− Needs two 12mm holes and one 50mm hole
− Door and frame must be flush
− Remote control needs a Thread-enabled Matter controller
− Some Aqara features are lost if paired straight to a third-party platform

Setup & Installation

Aqara says the door must be 20 to 60mm thick, with a backset of 40 to 45mm, a door gap of 3 to 7mm and the door flush with the frame. You need two 12mm holes and one 50mm hole, a PH1 screwdriver and combination pliers. On left-opening doors the rear lock is fitted upside down.

Install the Aqara Home app, press Set once and add the lock, then calibrate it from setup mode (press Set, then 5). For Matter, remove the inner battery cover and scan the code on the inner panel.

Common Problems & Fixes

Running into issues? Our Aqara Smart Rim Lock U500 troubleshooting guide covers step-by-step fixes for the common faults. Popular guides: offline, auto-lock, fingerprint, stiff or not locking.

Who Should Buy It

Anyone who wants a keyless smart lock for a door that suits a surface-mounted rim lock, with fingerprint, PIN and Apple Home Key, and who is happy to drill the holes it needs.

Verdict

The Rim Lock U500 packs fingerprint, PIN, NFC, Apple Home Key and a doorbell button into a surface-mounted lock, with Matter over Thread for every major platform. It needs drilling and a flush door, and remote control needs a Thread controller, but it is a complete keyless upgrade for the right door.

As an affiliate, we may earn a commission from qualifying Aqara purchases.

Need a hand with this?

If you are not sure your door suits this lock, or you would rather have it fitted for you, a locksmith can check it. You can compare up to 3 quotes from local locksmiths.

We may earn a commission if you request quotes through this link, at no cost to you.

Related Guides

⚠️ Important: This page is for guidance only. Smart lock installation, compatibility and security requirements vary by door type, lock mechanism and property. Always refer to Aqara’s official installation guide before making any changes to your door lock. If in doubt, consult a qualified locksmith. Check with your insurer before replacing or modifying your door lock.