Aqara Smoke Detector Offline: How to Fix It

Step-by-step fix guide | Aqara Smoke Detector

Try this first — Move the sensor closer to the hub and check its battery.

Is your Aqara Smoke Detector showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

The Aqara Smoke Detector keeps showing offline in the app. Aqara lists distance, low batteries and metal surfaces as the main causes.

Common Symptoms

  • The sensor shows offline
  • Readings or events stop updating
  • Automations stop firing
  • It comes back online and drops again

Safe Checks You Can Try

1. Move it closer

Aqara lists distance from the hub as a main cause. Move the sensor closer and reduce walls and obstacles in between.

2. Replace the battery

Aqara lists a low or flat battery as a common cause. Fit a new one CR17450 battery.

3. Keep it off metal

Aqara says mounting on metal can weaken the signal. Move it to a non-metal surface.

4. Update the firmware

Update the sensor and hub firmware in the Aqara Home app.

Helpful accessory: Find the Aqara Smoke Detector
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.