Aqara Spatial Multi-Sensor FP400 Not Detecting People: How to Fix It

Step-by-step fix guide | Aqara Spatial Multi-Sensor FP400

Try this first — Check the FP400’s mounting height and angle, then raise the sensitivity in the Aqara Home app.

Is your Aqara Spatial Multi-Sensor FP400 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.

What This Problem Means

The FP400 misses people, or drops them when they sit still.

Common Symptoms

  • People are not detected in part of the room
  • Someone sitting still is marked absent
  • Detection is unstable with people close together

Safe Checks You Can Try

1. Check height and orientation

Aqara recommends 1.5 to 2 metres on a wall, or 3 to 4 metres on the ceiling.

2. Raise the sensitivity

Increase the presence sensitivity in the Aqara Home app.

3. Adjust the Absence Confirmation Period

Aqara says to shorten it for distant or obstructed areas, and lengthen it where people stay still, such as a bed.

4. People very close together

Aqara says detection can be unstable when two people are within about 1 metre. Set busy areas as a larger Monitoring Zone.

Helpful accessory: Find the Aqara Spatial Multi-Sensor FP400
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.