Step-by-step fix guide | Aqara Temperature and Humidity Sensor T1
Is your Aqara Temperature and Humidity Sensor T1 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.
What This Problem Means
The Aqara Temperature and Humidity Sensor T1 will not pair. Aqara lists the setup steps, distance and the type of hub as the usual causes.
Common Symptoms
- The app cannot find the sensor
- Pairing fails part-way through
- The sensor adds but shows offline straight away
Safe Checks You Can Try
1. Check you have an Aqara hub
This sensor uses Zigbee and needs an Aqara Zigbee hub; it cannot connect to your phone directly.
2. Add it again
Aqara’s first suggestion is to repeat the adding steps. In the Aqara Home app tap + and add the sensor again, keeping it near the hub.
3. Move it closer
Aqara lists distance from the hub as a main cause. Move the sensor closer and reduce walls and obstacles in between.
4. Check how many devices are on the hub
Aqara says too many devices on one hub can stop a sensor connecting.
5. Reset and pair again
Hold the reset button for over 5 seconds until the light flashes 3 times; the hub announces Device Deleted. Then add it again in the Aqara Home app.
We may earn a commission from Aqara purchases made through links on this page.
When To Contact Support
If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.
Related Guides
