Leak Sensor | UK 2026
Aqara Water Leak Sensor T1 Review

Detects water from about 0.5mm | IP67 | Zigbee 3.0 | Extendable probes

Overview

The Aqara Water Leak Sensor T1 detects water from about 0.5mm and is rated IP67. It uses Zigbee 3.0 with an Aqara hub, supports Apple Home critical alerts, and its coverage can be extended by wiring to the probe screws.

Ad: we earn commission if you buy through the price buttons on this page.

Check latest price

Key Features

✓Detects water from about 0.5mm
✓IP67 against short-term flooding
✓Zigbee 3.0; Aqara hub required
✓Apple Home critical alerts
✓Coverage extendable by wiring to the probe screws
✓One CR2032 battery, about 2 years
✓OTA updates

Pros & Cons

Pros

+ Waterproof IP67
+ Extendable coverage
+ Critical alerts in Apple Home
+ Over-the-air updates

Cons

− Needs an Aqara hub for alarms
− No buzzer on the sensor itself

Setup & Installation

Add it from your hub in the Aqara Home app, then place it where a leak would collect. To cover a larger area, Aqara says you can wire to the probe screws.

Common Problems & Fixes

Running into issues? Our Aqara Water Leak Sensor T1 troubleshooting guide covers step-by-step fixes for the common faults. Popular guides: won’t pair, offline.

Who Should Buy It

Anyone with an Aqara hub who wants leak alerts with Apple Home critical alerts and the option of wider coverage.

Verdict

The T1 improves on the original with Zigbee 3.0, OTA updates and extendable probes. Like all Aqara leak sensors, the alarm sounds on the hub.

As an affiliate, we may earn a commission from qualifying Aqara purchases.