If your Arlo Essential 3 Pan-Tilt Indoor is showing this problem, working through the checks below in order will resolve it in the large majority of cases. Each step is safe to carry out yourself and is verified against Arlo’s official support guidance.

What This Problem Means

The Arlo Essential 3 Pan-Tilt Indoor uses a motorised pan-tilt mechanism to rotate and follow motion. When it stops rotating, it is almost always a software or calibration issue rather than a mechanical fault.

Common Symptoms

• Camera stuck in one position and not moving
• Pan-tilt controls in the app not responding
• Auto-tracking not following subjects
• Camera rotates to one end and stops
• Unusual noise when trying to move

Safe Checks You Can Try

1. Restart the camera

Unplug the power adapter from the wall, wait 30 seconds, then plug it back in. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds at the same time. A firmware glitch is the most common cause of pan-tilt becoming unresponsive.

2. Check for physical obstruction

Inspect the camera mount and surrounding area for anything preventing rotation — cable caught in the mechanism, debris or the camera pressing against a surface.

3. Reset pan-tilt in the app

Open the Arlo Secure app, go to Device Settings and look for a motion or pan-tilt reset option. Running a reset returns the motor to its home position.

4. Update firmware

Open the Arlo Secure app and check for a firmware update in Device Settings. Out-of-date firmware can cause pan-tilt control issues.

5. Test manual controls

In the Arlo Secure app, try controlling the pan-tilt manually using the directional controls. If manual control works but auto-tracking does not, the issue is specifically with the tracking settings rather than the motor itself.

When To Contact Support

If the issue persists after working through all the checks above, contact Arlo support for further help. Your device may be eligible for a replacement if it is within its one-year warranty.