Self-Emptying Robot Vacuum and Mop
Dreame D20 Pro Plus Review

13,000Pa suction | LDS navigation | 5L dust bag, up to 150 days | 350 ml water tank | 32 moisture levels

Overview

The Dreame D20 Pro Plus is a robot vacuum and mop with 13,000Pa suction (five levels), LDS laser navigation, a 3D line laser for obstacles and an anti-fall sensor. It has a 500 ml dust box and a HyperStream DuoBrush, and Dreame says it boosts suction automatically on carpet.

Its base station charges the robot and empties it into a 5L dust bag that Dreame says lasts up to 150 days. Mopping is simpler than on Dreame’s self-cleaning models: you fill the robot’s 350 ml water tank, fit a damp mop pad and set one of 32 moisture levels in the app, then wash the pad yourself after each use. It crosses 20 mm thresholds and Dreame describes it as fully voice compatible.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓13,000Pa suction, five levels
✓LDS laser navigation; 3D line laser and anti-fall sensor
✓500 ml dust box
✓Auto-empty base station with a 5L bag (up to 150 days)
✓350 ml water tank with 32 moisture levels
✓Spot cleaning (hold the Dock button for 3 seconds)
✓Crosses 20 mm thresholds
✓Dreamehome app; voice compatible

Pros & Cons

Pros

+ 5L dust bag lasting up to 150 days
+ LDS laser navigation with a 3D line laser
+ 32 moisture levels for mopping
+ Spot cleaning from the robot

Cons

− The station doesn’t wash or dry the mop
− You fill the water tank and wash the pad by hand
− Slow 6-hour charge

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 0.5 m on each side and more than 1.5 m in front, then push the power cord in firmly until the indicator lights and fit the ramp extension plate. Put the robot on the station to charge; Dreame recommends a full charge before first use.

Scan the QR code under the robot’s cover to get the Dreamehome app, then tap “Scan QR code to connect” and follow the prompts. Only 2.4GHz Wi-Fi is supported. To mop, fill the water tank with clean water, not hot water (no detergent or disinfectant), fit a damp, wrung-out mop pad and avoid mopping carpets.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, auto-empty not working, won’t return to the base station.

Who Should Buy It

Anyone who mostly wants hands-free vacuuming with occasional mopping, and the longest time between bag changes of the Dreame robots we review (up to 150 days).

Verdict

The D20 Pro Plus empties itself into a 5L bag for up to 150 days and mops with a 350 ml tank. For a station that washes and dries the mops too, the D30 Ultra adds 25,000Pa suction.

As an Amazon Associate I earn from qualifying purchases.