Robot Vacuum and Mop with Self-Cleaning Base Station
Dreame L10s Ultra Gen 3 Review

25,000Pa suction | Dynamic laser + 3DAdapt | RoboSwing mop to 4 cm | Up to 231 min | Matter

Overview

The Dreame L10s Ultra Gen 3 (sold by Dreame UK as the L10s Ultra Gen 3 Set) is a robot vacuum and mop with 25,000Pa suction, 360° scanning from a built-in dynamic laser and 3DAdapt obstacle avoidance. Its two high-speed rotary mops have 32 moisture levels, lift 10.5 mm on carpet, and the MopExtend RoboSwing pushes a mop pad out by up to 4 cm to reach edges.

The base station washes the mops through 20 spray nozzles, dries them with hot air, empties the robot into a 3.2L dust bag for up to 100 days and refills the robot’s water and detergent automatically. The 5,200mAh battery gives up to 231 minutes (156 m²) of quiet vacuuming and charges 30% faster during off-peak hours. It maps up to 4 floors and works with Alexa, Siri, Google Home, Matter and Apple Watch.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓25,000Pa suction
✓Dynamic laser navigation with 360° scanning; 3DAdapt obstacle avoidance
✓Two rotary mops with 32 moisture levels
✓MopExtend RoboSwing: mop extends up to 4 cm
✓10.5 mm mop lift on carpet
✓Base station: 20-nozzle wash, hot-air drying, auto-empty (3.2L bag, up to 100 days), refill and detergent
✓5,200mAh battery, up to 231 min (quiet, vacuum only)
✓Maps up to 4 floors
✓Alexa, Siri, Google Home, Matter and Apple Watch

Pros & Cons

Pros

+ Up to 231 minutes of runtime
+ Works with Alexa, Siri, Google Home and Matter
+ Auto detergent and robot refill
+ Spot cleaning button and child lock

Cons

− Dreame doesn’t give a wash water temperature
− Lower suction than the L50 models
− Plumbed-in refill and drain needs the separate water hookup kit

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 5 cm on each side and more than 1 m in front; Dreame recommends a tile or marble floor so water can’t mark wood or carpet. Push the power cord firmly into the station until its indicator lights, fit the ramp extension plate and remove the robot’s protective pieces. Fit the mop pad holders onto the robot. Fill the clean water tank with clean water, not hot water (Dreame says hot water can deform it), and add Dreame’s cleaning solution to the dispenser.

Hold the power button for 3 seconds to turn the robot on, then scan the QR code under the robot’s cover to get the Dreamehome app. In the app, tap “Scan QR code to connect”, scan the same code and follow the prompts. Only 2.4GHz Wi-Fi is supported; the Wi-Fi light under the cover blinks slowly when the robot is ready to connect.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, not charging, auto-empty not working.

Who Should Buy It

Anyone who wants a full self-cleaning station, a long runtime, and support for Alexa, Siri, Google Home and Matter.

Verdict

The L10s Ultra Gen 3 has a long 231-minute runtime, a station that refills the robot and doses detergent, and support for Alexa, Siri, Google and Matter. The D30 Ultra is similar, but its manual lists no detergent dispenser or automatic robot refill; Dreame quotes 50°C hot-air drying for it.

As an Amazon Associate I earn from qualifying purchases.