Robot Vacuum and Mop with Self-Cleaning Base Station
Dreame X50 Ultra Complete Review

20,000Pa suction | Retractable VersaLift DToF | 80°C mop wash | ProLeap up to 6 cm | Up to 220 min

Overview

The Dreame X50 Ultra Complete is a robot vacuum and mop with 20,000Pa suction and a retractable VersaLift DToF sensor that drops down so the robot can clean under low furniture. It uses 3D structured light and AI to recognise up to 200 object types, and its ProLeap system climbs two-step thresholds up to 6 cm and single steps of 4.2 cm. The MopExtend RoboSwing mop reaches 4 cm out to the edges and lifts 10.5 mm on carpet, and the robot can leave its mops on the station when it only needs to vacuum.

The base station empties the robot into a 3.2L dust bag for up to 100 days, washes the mops with water heated to 80°C (with four temperature settings), dries them with hot air and refills the robot’s tank and cleaning solution. It also has a UV light. The 6,400mAh battery gives up to 220 minutes in quiet mode, and Dreame lists Alexa, Google Home, Siri and Matter, plus its own “OK, Dreame” voice control.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓20,000Pa suction
✓Retractable VersaLift DToF sensor
✓3D structured light and AI: up to 200 object types
✓ProLeap: 6 cm two-step, 4.2 cm single-step thresholds
✓MopExtend RoboSwing (4 cm), 10.5 mm mop lift, automatic mop removal
✓Base station: auto-empty (3.2L bag, up to 100 days), 80°C wash, hot-air drying, auto refill and solution
✓UV light in the base station
✓6,400mAh battery, up to 220 min (quiet)
✓Alexa, Google Home, Siri, Matter and “OK, Dreame”

Pros & Cons

Pros

+ Retractable sensor for low furniture
+ Climbs two-step thresholds up to 6 cm
+ 80°C mop wash with four temperature settings
+ Up to 220 minutes of runtime

Cons

− 20,000Pa is lower than the Matrix10 and L50s models
− Plumbed-in refill and drain needs the separate water hookup kit
− Takes about 4.5 hours to charge, longer than the L50 models’ 3.5 hours

Versions, Kits and Accessories

✓The Complete is the X50 Ultra plus an Extra Accessories Kit: a main brush, 2 side brushes, 3 dust box filters, 3 dust bags, 12 mop pads and a bottle of cleaning solution (from Dreame’s X50 manual)

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 5 cm on each side and more than 1 m in front; Dreame recommends a tile or marble floor so water can’t mark wood or carpet. Push the power cord firmly into the station until its indicator lights, fit the ramp extension plate and remove the robot’s protective pieces. Fit the mop pad holders under the robot, and switch the station on with the I/O switch on its back. Fill the clean water tank with clean water, not hot water (Dreame says hot water can deform it), and add Dreame’s cleaning solution to the dispenser.

Hold the power button for 3 seconds to turn the robot on, then scan the QR code under the robot’s cover to get the Dreamehome app. In the app, tap “Scan QR code to connect”, scan the same code and follow the prompts. Only 2.4GHz Wi-Fi is supported; the Wi-Fi light under the cover blinks slowly when the robot is ready to connect.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, not charging, mop washing problems.

Who Should Buy It

Anyone with low furniture and raised thresholds who wants a hot-water wash station and a long runtime.

Verdict

The X50 Ultra Complete lowers its sensor for low furniture, climbs 6 cm thresholds and washes its mops at 80°C. The X60 Pro Ultra Complete more than doubles the suction, to 42,000Pa, and climbs double-layer steps up to 10 cm.

As an Amazon Associate I earn from qualifying purchases.