Step-by-step fix guide | Echo Show 8 (2025 release)
These steps follow Amazon’s guides to pairing Bluetooth on an Echo device with a screen, removing paired devices and Echo Bluetooth issues.
What This Problem Means
On the Echo Show 8 (2025 release), you pair Bluetooth devices on the screen. Amazon’s Bluetooth guide lists five checks: the Echo’s software, the Bluetooth profile your device uses, interference, the other device’s battery and distance, and pairing again from scratch.
Common Symptoms
- Your phone or speaker doesn’t appear in the Bluetooth list
- It pairs but won’t reconnect later
- The connection drops or the sound breaks up
- A device that used to connect now won’t
Safe Checks You Can Try
1. Pair from the screen
Put the phone or speaker in pairing mode. On the Show, open Settings (on Alexa+, tap Menu > Settings; on the original Alexa, swipe down from the top of the screen and tap Settings; or say “Go to Settings”), then Device Options > Bluetooth. If your device isn’t listed, tap the scan icon. Tap the device, then Connect.
2. Reconnect by voice
Once a device has been paired, turn on its Bluetooth and say “Pair Bluetooth”. Amazon says some devices reconnect automatically when they are in range (Amazon’s pairing guide).
3. Update the software
Open Settings > About this Device > Check for Software Updates (Amazon’s update guide). Amazon’s reset guide puts About this Device under Device Options, so look there if you don’t see it straight away.
4. Check the Bluetooth profile
Amazon says your Bluetooth device must use a supported profile: Advanced Audio Distribution Profile (A2DP SNK) or Audio/Video Remote Control Profile (AVRCP). Check the other device’s instructions if you aren’t sure.
5. Cut interference and charge it
Move both devices away from microwaves, baby monitors and other wireless devices. Make sure the Bluetooth device is fully charged and close to the Show when you pair it.
6. Forget it and pair again
If it was paired before, remove it and pair it again. On the Show, open Settings > Device Options > Bluetooth, tap the info icon next to the device, then Forget Device. In the Alexa app, go to Devices > your device > Settings > Bluetooth Devices > select the device > Forget Device (Amazon’s forget guide). Amazon’s app pairing route is Devices > your device > Device Settings > Bluetooth Devices > Pair A New Device; Amazon labels the menu Settings on one page and Device Settings on the other.
7. Restart the Show
Unplug the power adapter, wait 15 seconds and plug it back in. That is the wait Amazon’s guide for Echo devices with a screen gives before you try anything bigger. Let the home screen come back before you test it again.
When To Contact Support
If the problem is still there after these steps, Amazon’s Echo Show support page lists all of Amazon’s help topics for devices with a screen. Contact Amazon customer service if you still need help, and say which steps you have already tried, including the restart.
Last resort: factory reset. If nothing else works, reset the Show. You do this on the device, not in the Alexa app. Amazon’s reset guide for devices with a screen gives two methods: press and hold the Microphones & Camera Enable/Disable and Volume Down buttons, both on the side of the Echo Show 8 (2025 release), until you see the Amazon logo, about 15 seconds. Or open Settings > Device Options > About this Device > Reset to Factory Defaults and choose Reset. Either way, you then follow the on-screen instructions to set the Show up again. Full steps are in our Echo Show reset guide.
Related Guides
