Robot Vacuum and Roller Mop with ThermoFresh Station
eufy Omni E35 Review

35,000Pa suction | AI See 3.0 | HydroJet roller mop, 16N | 60°C wash, 55°C drying | Up to 188 min

Overview

The eufy Omni E35 (sold in the UK as the Anker eufy E35 Omni) is a robot vacuum and roller mop with 35,000Pa suction, LiDAR navigation and AI See 3.0 obstacle avoidance. AI See 3.0 combines an RGB camera, an LED light and dual line lasers, and eufy says it avoids more than 280 object types as small as 1 cm³, even in the dark. The HydroJet roller mop presses down with 16N, rinses itself with fresh water and extends 32 mm to reach walls, and two CornerRover arms sweep out corners.

eufy’s UK page says the ThermoFresh 8-in-1 station washes the roller with 60°C water and dries it with 55°C air (the manual gives a single 55°C figure). It also empties the robot into a 2.5L dust bag, takes away the dirty water and refills the robot with clean water and detergent. eufy quotes up to 60 days of hands-free cleaning. The 5,200mAh battery gives up to 188 minutes in quiet mode, and the robot climbs objects up to 30 mm.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓35,000Pa suction
✓LiDAR navigation
✓AI See 3.0: RGB camera, LED light and dual line lasers, 280+ object types
✓HydroJet roller mop: 16N, extends 32 mm
✓Two CornerRover arms and DuoSpiral brushes
✓ThermoFresh station: auto-empty (2.5L bag), 60°C wash, 55°C drying, auto detergent
✓2.5L clean and 2.4L dirty water tanks
✓5,200mAh battery, up to 188 min (quiet)
✓Climbs objects up to 30 mm
✓Alexa and Google Assistant

Pros & Cons

Pros

+ 35,000Pa suction
+ 60°C mop wash and 55°C drying
+ Roller mop extends 32 mm to the wall
+ Avoids 280+ object types, even in the dark

Cons

− Neither the E35’s UK page nor its manual’s setup steps list Matter
− The manual sends you to the app for error fixes
− Drying takes about 3.5 to 7 hours

Setup & Installation

Press the detachable base firmly into place, then put the station against a wall on a hard, level floor with a strong Wi-Fi signal, leaving at least 1.5 m clear in front and 0.5 m on both sides. Fill the clean water tank with clean water, not hot water (the white granules inside are descaler), fit the floor cleaning solution and close the tank cap until it clicks. Remove the privacy sticker and foam blocks and dock the robot to charge.

Download the eufy app, then tap + > Add Device > Clean > Robot Vacuum-E Series > Omni E35 and follow the steps. Your router must broadcast a 2.4GHz signal. If setup fails, hold the Power and Recharge buttons together for 3 seconds until you hear a voice prompt.

Common Problems & Fixes

Running into issues? Our eufy robot vacuum troubleshooting guide covers step-by-step fixes taken from eufy’s own manuals, including won’t connect to Wi-Fi, mop wash or drying not working, red light on the robot or station.

Who Should Buy It

Anyone who wants 35,000Pa suction, a roller mop that extends to the skirting and a station that washes the mop with hot water and dries it with warm air.

Verdict

The Omni E35 combines 35,000Pa suction with a 60°C wash, 55°C drying and a roller mop that extends to the wall. The Omni S2 adds Matter support, a 70°C wash and up to 260 minutes of vacuuming.

As an Amazon Associate I earn from qualifying purchases.