Smart Thermostat with Relay
Netatmo Smart Thermostat Review

E Ink display  |  3 AAA batteries  |  Relay joins 2.4 GHz Wi-Fi  |  Boiler on/off control  |  Alexa and Google Assistant

Please note: This review covers the Netatmo Smart Thermostat for on/off boiler control. Netatmo’s Smart Modulating Thermostat (for OpenTherm modulating boilers) and its newer ORIGINAL range are different products.

Overview

The Netatmo Smart Thermostat is a battery-powered room thermostat designed by Philippe Starck, with a white and translucent body and interchangeable red, orange, green and blue finishes. It switches your boiler on and off as a dry contact (ON/OFF) control, and its relay links it to your 2.4 GHz Wi-Fi, so you can run schedules and change the temperature from the Home + Control app or by voice. Netatmo says there are no additional subscriptions, and consumption tracking and reports are free.

Netatmo gives two ways to install it. In the wired installation, the thermostat replaces a wired room thermostat and the relay plugs into a wall socket nearby. In the wireless installation, the relay is fitted at the boiler on the supplied boiler adapter, and the thermostat can sit on its wall bracket or mobile stand. Smart Radiator Valves can be added later for room-by-room control. Netatmo sells a separate Smart Modulating Thermostat for OpenTherm modulating boilers, and its newer ORIGINAL range is a separate system that does not work with these valves.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓E Ink display on a battery-powered thermostat, with three AAA batteries rated for 2 years in Netatmo’s guides
✓Relay included: it links to the thermostat by long-range radio and joins your 2.4 GHz Wi-Fi
✓Two installation options: wired (relay in a wall socket) or wireless (relay fitted at the boiler)
✓Auto-Adapt can switch the heating on earlier to reach your setpoint, adapting to the outside temperature and your home’s insulation
✓Works with Alexa and Google Assistant; Apple Home where the relay shows the “Setup HomeKit” menu
✓Add up to 20 Smart Radiator Valves in up to 10 rooms with a new thermostat
✓Default Comfort 19°C, Night 17°C and Eco 16°C profiles, plus Away and Frost-Guard modes
✓Keeps to the weekly schedule or the last setpoint during a Wi-Fi outage, according to Netatmo’s 2020 manual
✓Free consumption tracking and reports
✓Automatic firmware updates for the relay, thermostat and valves

Pros & Cons

Pros

+ Works with Alexa and Google Assistant, for the thermostat and the radiator valves
+ No additional subscriptions, with free consumption reports
+ Auto-Adapt times the heating to the outside temperature and your insulation
+ Grows into room-by-room control with up to 20 Smart Radiator Valves
+ Netatmo says you can install it yourself, or use a Netatmo-certified installer

Cons

− Netatmo lists no hot water control for this model
− No built-in geofencing: Netatmo lists geolocation only for its ORIGINAL thermostats
− The relay needs a wall socket (wired installation) or wiring at the boiler (wireless installation)
− Apple Home only on units whose relay shows the “Setup HomeKit” menu

Versions, Kits and What You Need

✓Netatmo Additional Smart Radiator Valve — Adds room-by-room control; each valve links by radio to this thermostat’s relay. Check latest price at Amazon
✓Netatmo Smart Modulating Thermostat — A separate model for OpenTherm modulating boilers only, with hot water control on OpenTherm boilers that have an integrated tank.

Setup & Installation

The box holds the thermostat, a mobile stand, the relay, a boiler adapter, a wall bracket, a 132 x 132 mm wall plate, four colour adhesives, a mains adapter, three AAA batteries, and four screws and wall plugs. Your heating needs to be controllable by a dry contact (ON/OFF) room thermostat; Netatmo lists individual boilers (electric, gas, oil, wood), heat pumps, air-to-water heat pumps and wood or pellet stoves. Netatmo says it is easy to install yourself, or you can use a Netatmo-certified installer, and its setup guide starts by telling you to disconnect power at the fuse or circuit breaker.

In the wired installation, the boiler control wires go to the connectors on the thermostat’s wall bracket, any power supply wires are isolated with a terminal block, and the relay plugs into a wall socket near the thermostat in a clear spot with a strong Wi-Fi connection. In the wireless installation, the boiler adapter is wired to the boiler’s control terminals (black and grey, no polarity) and power terminals (brown to phase, blue to neutral), and the relay sits on it near the boiler. Netatmo recommends placing the thermostat at least 1.5 m from the floor and over 1 metre from heat or cooling sources. Set-up finishes in the Home + Control app; older guides used the Netatmo Energy app. If you are unsure about the wiring, use a qualified electrician or heating engineer, and leave any work inside the boiler to a Gas Safe registered engineer.

Common Problems & Fixes

Running into issues? Our Netatmo Smart Thermostat troubleshooting guide has step-by-step fixes taken from Netatmo’s own support pages, including offline, relay not connecting, not heating.

Who Should Buy It

A good fit if your boiler takes a simple on/off room thermostat and you want app, schedule and voice control with no subscription, plus the option to add radiator valves room by room. If you have an OpenTherm modulating boiler, look at Netatmo’s Smart Modulating Thermostat instead.

Verdict

The Netatmo Smart Thermostat is a tidy, subscription-free way to put an on/off boiler on Wi-Fi, with Auto-Adapt, Alexa and Google Assistant support and a clear route to room-by-room control. It does not handle hot water and has no built-in geofencing, so check those matter less to you than the design and the valve add-ons.

As an Amazon Associate I earn from qualifying purchases.

Need a hand with this?

If you are unsure about the thermostat wiring or the boiler connection, a heating engineer can fit it or find the fault. Any work on the boiler itself must be done by a Gas Safe registered engineer. You can compare up to 3 quotes from local heating engineers.

We may earn a commission if you request quotes through this link, at no cost to you.

⚠️ Important: This page is for guidance only. Heating systems vary. Turn off the power before touching any wiring, and if a radiator valve is seized, damaged or leaking, stop and contact a heating engineer. Follow Netatmo’s official guidance for your device.