Outdoor Motion Sensor
Philips Hue Outdoor Sensor Review

0-10 m detection  |  IP54  |  -20°C to 45°C  |  2 x AA batteries  |  Hue Bridge required

Overview

The Philips Hue Outdoor Sensor is a black, wall-mounted motion sensor for outdoor areas. Hue lists a detection area of 0-10 m and an IP54 rating, which Hue says means it is protected against dust and splashing water and will continue working in most weather conditions. It runs from -20°C to 45°C and measures 76 x 76 x 56 mm. Motion sensitivity is adjustable, so you can lower it if branches swaying in the wind set it off too often.

It runs on 2 x AA (LR6) batteries, which are included, and connects over Zigbee and Bluetooth. Hue says both its indoor and outdoor motion sensors need a Hue Bridge-controlled setup and the Philips Hue app (Android 12.0 or above, iOS 17 or later). It works with Matter through a Hue Bridge. Hue says security monitoring only applies to the indoor motion sensor, not this one. It comes with a 2-year warranty and a minimum support period of 60 months from purchase.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓Detection area 0-10 m
✓IP54: protected against dust and splashing water
✓Works from -20°C to 45°C
✓Adjustable motion sensitivity
✓2 x AA (LR6) batteries included
✓Zigbee and Bluetooth; works with Matter through a Hue Bridge
✓76 x 76 x 56 mm; wall mounting
✓2-year warranty; minimum support period of 60 months from purchase

Pros & Cons

Pros

+ 0-10 m detection area
+ IP54 rated against dust and splashing water
+ Runs from -20°C to 45°C
+ Battery powered (2 x AA)

Cons

− Needs a Hue Bridge
− Not for security monitoring (Hue limits that to the indoor sensor)

Setup & Installation

Add the sensor in the Philips Hue app: go to Settings > Devices and tap the + button. Hue says to place it within range of your setup with the front facing where motion happens, and the higher you mount it, the wider the area it covers. Test it before you mount it permanently.

If it triggers too often because of branches moving in the wind, lower the sensitivity; if it misses movement, raise it. If lights don’t come on in daylight, check the daylight threshold. For other problems, use Reset on its edit screen in the app, or delete it, press the setup button/pinhole for more than 10 seconds and add it again.

Common Problems & Fixes

Running into issues? Our Philips Hue troubleshooting guide covers step-by-step fixes taken from Hue’s own support pages, including outdoor sensor not detecting motion.

Who Should Buy It

Anyone with a Hue Bridge who wants outdoor lights to react to movement up to 10 m from the sensor.

Verdict

The Hue Outdoor Sensor doubles the indoor sensor’s detection area to 0-10 m and adds IP54 protection, but it needs a Hue Bridge. Hue says security monitoring only works with the indoor Hue Motion Sensor.

As an Amazon Associate I earn from qualifying purchases.

Related Guides