Step-by-step fix guide | tado° X range
tado says the Smart Thermostat X and Radiator X can be installed and controlled offline, and work out of the box once connected to the heating system.
What This Problem Means
Option 1 is manual control only: wire the thermostat or mount the radiator thermostat. Option 2 lets you register devices through a temporary hotspot.
Safe Checks You Can Try
1. What you need
Two phones (one for the hotspot, one running the tado app), a Bridge X and the thermostat or radiator thermostat. Each device must be registered in the app.
2. Set up the hotspot
On an iPhone use Personal Hotspot with Maximise Compatibility on. On Android use hotspot or tethering.
3. Create the Home
Connect the second phone to the hotspot, open the app, and create a new account and Home.
4. Add the Bridge X
Go to Settings > Rooms & Devices > Add device and scan the QR code. Choose “Use Wi-Fi password”, connect to the hotspot network and allow home network access. If the prompt is missing, check Settings > Rooms & Devices > Bridge X.
5. Add the other devices
Add the remaining devices by QR code and follow the app to connect them to the Bridge X.
6. Turn the hotspot off
Once the thermostat has connected to the Bridge X and the app it downloads the heating schedule. You can then turn off the hotspot and the devices keep following the stored schedules.
When To Contact Support
If the problem is still there after these checks, contact tado° support through the tado° Help Centre (help.tado.com). If you bought it from tado.com or an authorised retail partner, it may be covered by tado’s 2-year Premium Warranty, which tado says includes remote diagnostics and a rapid replacement if a hardware defect is confirmed. Products bought from eBay, Amazon Marketplace and other secondary sellers are not covered. This guide follows tado’s Help Centre article on installing without an internet connection.
We may earn a commission from qualifying tado° purchases.
