tado Smart Radiator Thermostat X Offline

Step-by-step fix guide | tado° Smart Radiator Thermostat X

Try this first — Check your Bridge X (or other Thread border router) is plugged in and online. A Radiator X that loses it shows Signal lost.

A Radiator X that drops offline has usually lost its link to your Thread border router. Work through these checks.

What This Problem Means

The Signal lost symbol on the Radiator X appears when it loses its connection to the Thread border router. tado also says a device with an unstable connection may still show as connected while the app warns that the signal is too weak.

Batteries matter too. tado says disconnecting the Bridge X, or any Thread border router, makes devices drain much faster because they keep searching.

Common Symptoms

  • Signal lost symbol on the display
  • Radiator X offline in the app
  • Weak signal banner on the device

Safe Checks You Can Try

1. Check the border router

Make sure the Bridge X, Wireless Receiver X or Heat Pump Optimizer X is powered and online. See our Bridge X offline guide.

2. Check the signal

In Settings > Rooms & Devices select the Radiator X and look for a weak signal banner. Our Thread range guide covers moving or adding a Bridge X.

3. Check the battery

A low or empty battery can take devices offline. Charge the pack. See our battery charging guide if it will not charge.

4. Restart the Radiator X

Turn and release the battery pack to detach it, then reinsert it, aligning the notches until it clicks. It reconnects automatically, and you do not need to remove the whole unit.

Helpful accessory: Find the tado° Smart Radiator Thermostat X
We may earn a commission from tado° purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact tado° support through the tado° Help Centre (help.tado.com). If you bought it from tado.com or an authorised retail partner, it may be covered by tado’s 2-year Premium Warranty, which tado says includes remote diagnostics and a rapid replacement if a hardware defect is confirmed. Products bought from eBay, Amazon Marketplace and other secondary sellers are not covered. This guide follows tado’s Help Centre articles on tado° X devices going offline and on Thread range.

Good to know. While a Radiator X is offline, tado says X devices keep controlling heating using their locally stored schedules but cannot be changed in the app, only manually.

Need a hand with this?

If a radiator valve is seized, damaged or leaking, a heating engineer can look at it. Any work on the boiler itself must be done by a Gas Safe registered engineer. You can compare up to 3 quotes from local heating engineers.

We may earn a commission if you request quotes through this link, at no cost to you.

⚠️ Important: This page is for guidance only. Heating systems vary. Turn off the power before touching any wiring, and if a radiator valve is seized, damaged or leaking, stop and contact a heating engineer. Follow tado°’s official guidance for your device.