tado Dazzle Mode: Turn It On or Off

Step-by-step fix guide | tado° Smart Thermostat X (2nd gen)

The Short Version

In the app go to Settings > Rooms & Devices, select the device and turn Dazzle Mode on or off.

If your thermostat display lights up when someone changes the temperature in the app, that is Dazzle Mode.

What This Problem Means

tado says that with Dazzle Mode on, a manual temperature change in the app can wake the device display even when no one touches it, showing the setpoint and the change.

It is available only on the Smart Thermostat X 2nd gen and Wireless Temperature Sensor X 2nd gen, not on the V3+ Home. It is unavailable when the battery is depleted.

Common Symptoms

  • Display lighting up on its own
  • Dazzle Mode option missing or not working
  • Device set up only through Matter

What To Do

1. Switch it on or off

Settings > Rooms & Devices, select the device, then toggle Dazzle Mode.

2. If it will not activate

tado says a device that was set up only through a Smart Home (Matter) integration will not activate it. Enable it only after you start using the tado° app.

3. If the option is missing

Check the battery is not depleted. See our charging guide.

Helpful accessory: Find the tado° Wired Smart Thermostat X 2nd Gen
We may earn a commission from tado° purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact tado° support through the tado° Help Centre (help.tado.com). If you bought it from tado.com or an authorised retail partner, it may be covered by tado’s 2-year Premium Warranty, which tado says includes remote diagnostics and a rapid replacement if a hardware defect is confirmed. Products bought from eBay, Amazon Marketplace and other secondary sellers are not covered. This guide follows tado’s Help Centre article on Dazzle Mode.