🔄 Try this first — Unplug the camera’s power adapter for 10 seconds, then plug it back in and wait for it to fully restart. Restart your router by unplugging it for 30 seconds too. This clears most temporary glitches.

If Tapo C260 is online but not saving footage, the problem is usually storage or the recording schedule rather than the camera itself.

What This Problem Means

If your Tapo C260 is showing this fault, working through the checks below in order resolves it in the large majority of cases. Each step is safe to try yourself and follows TP-Link’s official Tapo guidance.

Common Symptoms

  • No clips in the timeline
  • Gaps in recordings
  • Live View works but nothing is saved
  • Card fills and stops

Safe Checks You Can Try

1. Check the microSD card

Confirm a compatible card is fitted and recognised. Tapo cameras use the FAT32 or exFAT file system and support microSD cards up to 512GB. A card that was formatted for another device, or one over 512GB, may not be recognised.

2. Check the recording mode

This is a wired camera, so it supports continuous 24/7 recording to a microSD card. Check that Continuous Recording is enabled under Storage settings and that a card is fitted.

3. Enable loop recording

If the card is full, turn on loop recording so the oldest footage is overwritten automatically.

4. Check the recording schedule

Make sure no schedule or Privacy Mode is stopping recording at the times you expect.

5. Reformat the card

A corrupted card stops recording. Format it in the Tapo app (after backing up) to clear errors.

🔧 Helpful part: Find a compatible accessory on Amazon
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If you have worked through every step and your Tapo C260 still has this problem, the hardware may need attention. Visit TP-Link support for further help or to arrange a replacement if it is in warranty.