eufy SoloCam S230 Won’t Connect? Try These Fixes
Connection problems with the eufy SoloCam S230 usually appear during setup, or after a change to your router or Wi-Fi password.
What This Problem Means
If your eufy SoloCam S230 is showing this fault, working through the checks below in order resolves it in the large majority of cases. Each step is safe to try yourself and follows eufy’s official guidance.
Common Symptoms
- Setup fails part-way
- Won’t pair in the app
- QR code won’t scan
- Drops Wi-Fi right after setup
Safe Checks You Can Try
1. Use 2.4GHz Wi-Fi
eufy cameras and HomeBase connect on 2.4GHz only. If your router uses one name for both bands, separate them or connect to 2.4GHz during setup.
2. Check the password
Wi-Fi passwords are case-sensitive — re-enter carefully.
3. Reboot your router
Unplug it for 30 seconds and let it fully restart before trying again.
4. Stay close during setup
Keep the device near the router while pairing, then move it to its spot once connected.
5. Enable DHCP
If pairing the HomeBase, make sure DHCP is enabled on your router and temporarily disable any strict firewall rules.
As an Amazon Associate I earn from qualifying purchases.
When To Contact Support
If you have worked through every step and your eufy SoloCam S230 still has this problem, the hardware may need attention. Visit eufy support for further help or a replacement if it is in warranty.