Step-by-step fix guide | Aqara Camera Hub G2H Pro
Is your Aqara Camera Hub G2H Pro showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself.
What This Problem Means
The Aqara Camera Hub G2H Pro will not add to Apple Home, or it stops working there. Aqara’s manual covers the common error messages.
Common Symptoms
- “Unable to add accessory” or “Failed to add accessory”
- “Accessory already added”
- “Accessory not found”
- The camera shows No Response in Apple Home
Safe Checks You Can Try
1. If it says it could not add the accessory
Aqara says to restart your iPhone or iPad, reset the camera and try again.
2. If it says the accessory is already added
Aqara says to restart your iPhone or iPad, reset the camera, then add it by typing in the HomeKit setup code.
3. If it says no accessory was found
Aqara says to reset the camera, wait 3 minutes, then add it by typing in the setup code.
4. Keep the setup code safe
The HomeKit setup code is on the camera. Aqara advises keeping a copy somewhere safe.
5. Check the Wi-Fi band
The G2H Pro only connects to 2.4GHz Wi-Fi, so make sure your router is broadcasting a 2.4GHz network.
6. Check your Wi-Fi name and router settings
Aqara’s manual says Wi-Fi names or passwords with special characters such as @, #, %, – or $ can stop the camera connecting. It also says a router “Wi-Fi anti-squatter” setting or AP isolation can block the connection or stop your phone finding the camera.
7. Check your Apple home hub
HomeKit Secure Video needs an Apple home hub and an iCloud+ plan. Aqara says recordings are kept for 10 days and do not count against your iCloud storage.
We may earn a commission from Aqara purchases made through links on this page.
When To Contact Support
If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and you can also send feedback from the Aqara Home app. Have your proof of purchase ready in case a repair or replacement is needed.
Last resort: factory reset. Aqara’s manual says pressing the reset button 5 times resets the G2H Pro and clears its local information. You will need to add it to the Aqara Home app again, along with any Zigbee devices paired to it. Only do this if the steps above have not worked.
Related Guides
