Smart Display Switch | UK 2026
Aqara Display Switch V1 Review

2.08-inch screen, 4 buttons | 2 wired + 2 wireless | Zigbee, needs neutral | EU model

Overview

The Aqara Display Switch V1 is a wall switch with a 2.08-inch screen above four buttons. The two left buttons control wired lights and the two right buttons are wireless switches, and the screen can show custom names, colours and icons for each button.

It is a Zigbee switch that needs a neutral wire and an Aqara hub, supports Matter over Bridge through a compatible hub, and acts as a Zigbee repeater. A built-in presence sensor wakes the screen at a distance you choose. Aqara sells this EU model on its UK shop but does not state that it fits UK back boxes, so check with your electrician before you buy.

Ad: we earn commission if you buy through the price buttons on this page.

Check latest price

Key Features

✓2.08-inch screen with custom labels
✓Two wired loads and two wireless buttons
✓200 to 240 V, up to 8 A resistive
✓Presence wake from 0.2 to 2 m
✓Zigbee repeater
✓Matter over Bridge through a compatible hub
✓Power monitoring

Pros & Cons

Pros

+ Clear labels on the buttons
+ Wireless buttons for scenes
+ Presence wake and auto brightness
+ Strengthens your Zigbee network

Cons

− EU model: UK back-box fit is not stated by Aqara
− Needs neutral
− Needs an Aqara hub
− Up to four devices or scenes, one per button

Setup & Installation

Have a qualified electrician fit it. Aqara’s manual says it is a with-neutral switch: live to L, neutral to N and the lights to L1 and L2.

Add your hub first, then add the switch in the Aqara Home app. Aqara says it enters networking mode on first power-up, with a green light blinking on the screen.

Common Problems & Fixes

Running into issues? Our Aqara Display Switch V1 troubleshooting guide covers step-by-step fixes for the common faults. Popular guides: won’t pair, how to reset, wireless buttons not working, screen doesn’t wake.

Who Should Buy It

Anyone with a neutral at the switch who wants labelled buttons, scene control and presence wake in one switch.

Verdict

The Display Switch V1 is a smart-looking upgrade that makes scenes easy to find on the wall. It needs neutral, an Aqara hub and a check on UK back-box fit.

As an affiliate, we may earn a commission from qualifying Aqara purchases.

Need a hand with this?

If you are not comfortable with mains wiring, have a qualified electrician fit it for you. You can compare up to 3 quotes from local electricians.

We may earn a commission if you request quotes through this link, at no cost to you.

⚠️ Important: This page is for guidance only. Always turn off the power at the circuit breaker or fuse box before touching any wiring, and use a qualified electrician if you are not sure. Follow Aqara’s official guidance for your device.