Aqara Display Switch V1 Won’t Pair: How to Fix It

Step-by-step fix guide | Aqara Display Switch V1

Try this first — Add your Aqara hub first, then add the Display Switch V1 and wait for the hub’s confirmation.

Is your Aqara Display Switch V1 showing this problem? Work through the checks below in order, starting with the quickest. Each step is safe to try yourself, and any wiring checks are flagged for an electrician.

What This Problem Means

The Display Switch V1 will not add to the Aqara Home app.

Common Symptoms

  • The app cannot find it
  • The screen keeps blinking green

Safe Checks You Can Try

1. Check your hub

Aqara’s manual says a Zigbee 3.0 hub is required.

2. Add it from the app

In the Aqara Home app, tap Add Accessory and select Display Switch V1 EU. Aqara says it enters networking mode on first power-up, with a green light blinking on the screen.

3. Check the range

Aqara says the range reaches 7 to 10 metres through one wall. Check it by pressing any button 3 times quickly; the hub sounds a tone if they can communicate.

4. Move the hub closer

If pairing fails, move the hub closer and try again.

Helpful accessory: Find the Aqara Display Switch V1
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the problem is still there after these checks, contact Aqara support. Aqara’s technical support email is support@aqara.com, and Aqara’s UK shop lists a support line on 01384 414 200. Have your proof of purchase ready in case a repair or replacement is needed.