Aqara Doorbell Camera G400 Tamper Alarm Won’t Stop

Step-by-step fix guide | Aqara Doorbell Camera G400

Try this first — Open the Aqara Home app and turn off the tamper alarm in the doorbell’s settings. Aqara says the alarm cannot be switched off on the doorbell itself once it has sounded.

The G400 has a tamper alarm that sounds loudly if the doorbell is removed or interfered with. It is off by default, so if it is going off, it was either switched on or has been triggered by a movement of the unit.

What This Problem Means

Once the alarm starts, it cannot be stopped from the doorbell. Aqara states that the only way to stop it without the app is to cut the power supply, though this only stops the sound and is not a fix.

Common Symptoms

  • A loud alarm sounds from the doorbell
  • The alarm began after the doorbell was knocked or moved
  • It keeps starting again after a power cut

Safe Checks You Can Try

1. Disable it in the app

Go to the doorbell’s settings in the Aqara Home app and switch the tamper alarm off.

2. Check the mounting

Make sure the doorbell is securely fixed to its plate and that the wedge bracket, if fitted, has not shifted, since movement can trigger the alarm.

3. As a last resort, cut power

The manual notes the alarm can only be stopped on the device by removing the power supply. Turn it off at the transformer or PoE source, then fix the cause and switch the alarm off in the app.

4. Decide whether you want it on

The tamper alarm is off by default. Only turn it back on when the doorbell is firmly mounted.

Helpful accessory: Find the Aqara Doorbell Camera G400
We may earn a commission from Aqara purchases made through links on this page.

When To Contact Support

If the alarm persists after you switch it off in the app, contact Aqara support at support@aqara.com.