Robot Vacuum and Mop with Self-Cleaning Base Station
Dreame L10s Ultra Gen 2 Review

10,000Pa suction | Smart Pathfinder + 3DAdapt | RoboSwing mop | Auto-empty up to 60 days | 32 water levels

Overview

The Dreame L10s Ultra Gen 2 is a robot vacuum and mop with 10,000Pa Vormax suction and Dreame’s Smart Pathfinder and 3DAdapt technologies for route planning and obstacle avoidance, with an LDS laser and a 3D line laser sensor on the robot. Its two DuoScrub rotating mops have 32 water levels and lift 10.5 mm for carpets and rugs, which it finds with ultrasonic carpet detection, and the MopExtend RoboSwing reaches into gaps up to 4 cm deep at the edges. A movable rubber brush detangles hair.

The base station empties the robot into a 3.2L dust bag for up to 60 days, washes and dries the mops, refills the robot’s water tank and adds cleaning solution from its auto-detergent compartment; an optional water hookup kit (sold separately, only in some regions) adds automatic refilling and draining. The robot has a spot cleaning button and a child lock, takes about 3.5 hours to charge and works with Alexa, Google Home and Siri. Dreame also lists Direct Voice Call.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓10,000Pa Vormax suction; movable rubber brush that detangles hair
✓Smart Pathfinder and 3DAdapt; LDS laser and 3D line laser sensor
✓DuoScrub: two rotating mops with 32 water levels
✓MopExtend RoboSwing reaches gaps up to 4 cm deep
✓10.5 mm mop lift; ultrasonic carpet detection
✓Base station: auto-empty (3.2L bag, up to 60 days), mop washing and drying, robot refill and detergent
✓Spot cleaning button and child lock
✓About 3.5 h to charge
✓Alexa, Google Home, Siri and Direct Voice Call

Pros & Cons

Pros

+ Station refills the robot and doses detergent
+ Mop reaches gaps up to 4 cm deep at the edges
+ 32 water levels for mopping
+ Works with Alexa, Google Home and Siri

Cons

− Dreame doesn’t give the battery size or runtime
− Dreame doesn’t list hot-water mop washing
− Its manual says it can’t climb thresholds higher than about 2 cm

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 5 cm on each side and more than 1.5 m in front; Dreame recommends a tile or marble floor so water can’t mark wood or carpet. Push the power cord firmly into the station until its indicator lights, fit the ramp extension plate and remove the robot’s protective pieces. Fit the side brush and the mop pad holders onto the robot, and set the I/O switch on the back of the station to I. Fill the clean water tank with clean water, not hot water (Dreame says hot water can deform it), and add Dreame’s cleaning solution to the dispenser.

Hold the power button for 3 seconds to turn the robot on, then scan the QR code under the robot’s cover to get the Dreamehome app. In the app, tap “Scan QR code to connect”, scan the same code and follow the prompts. Only 2.4GHz Wi-Fi is supported; the Wi-Fi light under the cover blinks slowly when the robot is ready to connect.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, not charging, auto-empty not working.

Who Should Buy It

Anyone who wants a station that empties, washes, dries, refills the robot and doses detergent, and doesn’t need more than 10,000Pa suction.

Verdict

The L10s Ultra Gen 2 has 10,000Pa suction, a RoboSwing mop for edges and a station that empties, washes, dries, refills and doses detergent. The L10s Ultra Gen 3 has 25,000Pa suction, Matter support and a dust bag rated for up to 100 days.

As an Amazon Associate I earn from qualifying purchases.