Robot Vacuum with Multi-Mop Switching Base Station
Dreame Matrix10 Pro Review

30,000Pa suction | Thermal, scrubbing and sponge mops | 100°C mop wash | 40 mm thresholds | Matter

Overview

The Dreame Matrix10 Pro is a robot vacuum whose base station switches between three pairs of mop pads: thermal pads that Dreame lists with a 40°C heat setting, nylon bristled scrubbing pads and sponge pads. It has 30,000Pa suction, LDS laser navigation, and AI RGB and 3D structured light obstacle avoidance that recognises up to 280 types of object, with LED lights for dark areas. Its twisting mop reaches 4 cm further into corners.

The station washes the pads with 100°C water, dries them with hot air, empties the robot for up to 100 days and doses three solutions: floor cleaner, pet odour solution and wood floor care. The mop pads lift 10.5 mm on carpet, and the robot crosses 40 mm double-layer thresholds and 22 mm vertical steps. It has a spot cleaning button, a 5.8Ah battery that charges in about 4.5 hours, Matter support and built-in “OK, Dreame” voice control.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓30,000Pa suction
✓LDS laser navigation; AI RGB and 3D structured light for 280 object types
✓Multi-mop switching: thermal (40°C), scrubbing and sponge pads
✓Twisting mop reaches 4 cm into corners
✓Base station: 100°C wash, hot-air drying, auto-empty (up to 100 days)
✓Three solution compartments
✓10.5 mm mop lift on carpet
✓Crosses 40 mm double-layer thresholds
✓Matter and “OK, Dreame” voice control

Pros & Cons

Pros

+ Three named pad types, including heated thermal pads
+ 100°C mop wash
+ Matter support
+ Spot cleaning button on the robot

Cons

− No runtime published
− Dreame’s page doesn’t list Alexa, Google or Siri
− Dreame’s page gives two different obstacle figures (4 mm and 4 cm)

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 5 cm on each side and more than 1 m in front; Dreame recommends a tile or marble floor so water can’t mark wood or carpet. Push the power cord firmly into the station until its indicator lights, fit the ramp extension plate and remove the robot’s protective pieces. Open the station door with its button, remove the packing and fit the three mop sets into the slots of the matching colour. Add the three solutions to compartments A, B and C. Fill the clean water tank with clean water, not hot water (Dreame says hot water can deform it).

Hold the power button for 3 seconds to turn the robot on, then scan the QR code under the robot’s cover to get the Dreamehome app. In the app, tap “Scan QR code to connect”, scan the same code and follow the prompts. Only 2.4GHz Wi-Fi is supported; the Wi-Fi light under the cover blinks slowly when the robot is ready to connect.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, mop washing problems, red or orange error light.

Who Should Buy It

Anyone who wants the dock to switch automatically between thermal, scrubbing and sponge pads for different cleaning zones.

Verdict

The Matrix10 Pro switches between thermal, scrubbing and sponge pads, washes them at 100°C and supports Matter. The Matrix10 Ultra adds a retractable DToF sensor and ProLeap climbing up to 8 cm.

As an Amazon Associate I earn from qualifying purchases.