Robot Vacuum with Multi-Mop Switching Base Station
Dreame Matrix10 Ultra Review

30,000Pa suction | Three mop sets | 100°C mop wash | ProLeap up to 8 cm | Three solution compartments

Overview

The Dreame Matrix10 Ultra is a robot vacuum whose base station holds three sets of mop pads and swaps between them: the Dreamehome app pairs each set with different cleaning zones, so the robot comes back to change mops part way through a clean. It has 30,000Pa suction, a HyperStream DuoBrush that Dreame says handles hair up to 50 cm, and a retractable DToF sensor that lowers the robot to 89 mm for low furniture. 3D structured light and AI recognise more than 240 types of object.

The station washes the mop pads with 100°C water through 20 spray nozzles, dries them, empties the robot into a 3.2L dust bag for up to 100 days and refills the robot’s water tank. Its three solution compartments take floor cleaner, pet odour solution and wood floor care. ProLeap lets the robot climb steps up to 8 cm (single-layer steps up to 4.2 cm), the mop pads lift 10.5 mm on carpet, and it works with Alexa, Siri and Google Home. It has a 5.8Ah battery that charges in about 4.5 hours.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓30,000Pa suction; HyperStream DuoBrush
✓Retractable DToF sensor; 3D structured light and AI for 240+ object types
✓Auto Multi-Mop Switching: three mop sets on the station door
✓Base station: 100°C wash with 20 nozzles, drying, auto-empty (3.2L bag, up to 100 days), refill
✓Three solution compartments: cleaning, pet odour and wood floor care
✓ProLeap: steps up to 8 cm, single-layer steps of 4.2 cm
✓10.5 mm mop lift on carpet
✓Optional water hookup kit for refill and drainage
✓Alexa, Siri and Google Home

Pros & Cons

Pros

+ Swaps between three mop sets by room
+ 100°C mop wash
+ Three solutions dosed automatically
+ Climbs steps up to 8 cm (single-layer steps up to 4.2 cm)

Cons

− No runtime published
− Plumbed-in refill and drain needs the separate water hookup kit
− Mop sets must go back in their matching slots

Setup & Installation

Place the base station somewhere as open as possible with a good Wi-Fi signal, leaving more than 5 cm on each side and more than 1 m in front; Dreame recommends a tile or marble floor so water can’t mark wood or carpet. Push the power cord firmly into the station until its indicator lights, fit the ramp extension plate and remove the robot’s protective pieces. Open the station door with its button, remove the packing, then fit all three mop sets into the slots of the matching colour on the inside of the door. Add the cleaning, pet odour and wood floor care solutions to compartments A, B and C. Fill the clean water tank with clean water, not hot water (Dreame says hot water can deform it).

Hold the power button for 3 seconds to turn the robot on, then scan the QR code under the robot’s cover to get the Dreamehome app. In the app, tap “Scan QR code to connect”, scan the same code and follow the prompts. Only 2.4GHz Wi-Fi is supported; the Wi-Fi light under the cover blinks slowly when the robot is ready to connect.

Common Problems & Fixes

Running into issues? Our Dreame troubleshooting guide covers step-by-step fixes taken from Dreame’s own manuals and help centre, including won’t connect to Wi-Fi, mop washing problems, red or orange error light.

Who Should Buy It

Homes with different floors, such as a kitchen, wooden living room and pet area, that want a separate mop set for each area.

Verdict

The Matrix10 Ultra swaps between three mop sets on its own, washes them at 100°C and doses three solutions. The Matrix10 Pro does the same with three named pad types, and its page lists Matter rather than Alexa, Siri and Google Home.

As an Amazon Associate I earn from qualifying purchases.