Echo Show 8 (2025 release) Smart Home Not Working

Step-by-step fix guide | Echo Show 8 (2025 release)

Try this first — Check the smart home device is on and works in its maker’s app. Then move the Echo Show 8 (2025 release) at least 6 ft (2 m) away from your router.

These steps follow Amazon’s guides Alexa isn’t controlling smart home devices and my smart home device doesn’t connect to Alexa, with the Echo Show 8 (2025 release)’s hub role from Amazon’s own pages.

What This Problem Means

Amazon’s UK safety page for the Echo Show 8 (2025 release) lists a Zigbee radio, so it has a built-in Zigbee hub. Amazon’s developer pages also list it as a Thread border router and a Matter controller. Amazon’s guides point to power and batteries, out-of-date software, a skill that has lost its link, and distance from the router or the hub.

Common Symptoms

  • Alexa says a device isn’t responding
  • A device has gone from the Alexa app
  • Discovery says no new devices were found
  • A Zigbee or Matter device won’t pair
  • The device works in its maker’s app but not with Alexa

Safe Checks You Can Try

1. Check the device has power

Check the smart home device is switched on, and fit new batteries if it uses them. Amazon also says to update the Alexa device and the Alexa app: on the Show, open Settings > About this Device > Check for Software Updates (Amazon’s update guide).

2. Test it in the maker’s app

If the device uses a skill, try it in its maker’s app. If it works there but not with Alexa, remove the skill and add it again in the Alexa app. If it doesn’t work in the maker’s app either, check its internet connection there first.

3. Move the Show away from the router

Amazon says “If your device is next to your router, it may not work”, and to move your Alexa device at least 6 ft (2 m) away from the router. To check the Show itself is online, ask “Are you online?”.

4. Check the distances

Amazon says Zigbee devices must be within 30 ft (9 m) of the hub or another connected Zigbee device, Matter devices within 30 ft (9 m) of the Matter controller, and Bluetooth smart devices within 30 ft (9 m) of a compatible Echo. Matter devices that use Wi-Fi must also be on the same 2.4 GHz network as the Matter controller.

5. Add the device again

For a Zigbee device, check the device has the Zigbee logo, put it in pairing mode and say “Discover my devices” (Amazon’s Zigbee guide). For a Matter device, go to Devices > + > Add Device, tap the Matter icon in the Shortcuts bar, tap Yes and scan the QR code or enter the pairing code (Amazon’s Matter guide). For other devices, go to Devices > + > Add Device, pick the category and then the brand (Amazon’s add device guide).

6. If discovery finds nothing new

Amazon says “No new devices found” can mean Frustration-Free Setup has already connected the device, so check Devices in the Alexa app. If a device that used to work has stopped, disconnect it in the Alexa app and set it up again. Also check it carries the “Works with Alexa” badge.

When To Contact Support

If the problem is still there after these steps, Amazon’s Echo Show support page lists all of Amazon’s help topics for devices with a screen. Contact Amazon customer service if you still need help, and say which steps you have already tried, including the restart.

Last resort: factory reset. Amazon’s last step is to reset both the Alexa device and the smart home device. For the smart home device, follow its maker’s instructions. If nothing else works, reset the Show. You do this on the device, not in the Alexa app. Amazon’s reset guide for devices with a screen gives two methods: press and hold the Microphones & Camera Enable/Disable and Volume Down buttons, both on the side of the Echo Show 8 (2025 release), until you see the Amazon logo, about 15 seconds. Or open Settings > Device Options > About this Device > Reset to Factory Defaults and choose Reset. Either way, you then follow the on-screen instructions to set the Show up again. Full steps are in our Echo Show reset guide.