Radiator Controller, No Screen
Honeywell Home HR91 Review

Needs an evohome controller (not R3)  |  No screen  |  M30 x 1.5 valves  |  AA batteries, two-year life  |  Open window feature

Overview

The Honeywell Home HR91 is a wireless radiator controller with no screen, made for evohome. Resideo, which makes Honeywell Home products, describes “continuous 2-way communication with the evohome”, and its installation guide lists the HR91 as a radiator controller for the evohome Controller (ATC928). It fits the most common radiator valves of the type M30 x 1.5. Local control is a basic override button for setting frost protection, and Resideo lists an open window feature that shuts off the radiator when the room temperature drops, plus a child lock with a simple mounting lock.

It is battery powered with a two-year battery life, and Resideo’s installation guide says to insert the AA batteries supplied. You need an evohome controller for the HR91 to work at all, and Resideo says evohome can control up to 12 zones individually. For app control, evohome uses Resideo’s Total Connect Comfort (TCC) app, and Resideo lists IFTTT, Google Assistant and Amazon Alexa for evohome. An anti-vandal protection shield is an optional accessory.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓No screen: “without display and without local temperature control” in Resideo’s System Builder
✓Continuous 2-way communication with the evohome controller
✓Fits the most common radiator valves of the type M30 x 1.5
✓Open window feature shuts off the radiator when the room temperature drops
✓Basic override button for setting frost protection
✓Child lock with a simple mounting lock
✓Battery powered, two-year battery life; AA batteries supplied
✓LED flashes amber while binding and shows continuous green for 5 seconds on success
✓Optional anti-vandal protection shield
✓Single (HR91) or pack of 4 (HR914)

Pros & Cons

Pros

+ No screen, with a child lock and mounting lock
+ Open window feature shuts off the radiator when the room temperature drops
+ Two-year battery life
+ Fits common M30 x 1.5 radiator valves
+ Sold singly or as a pack of 4

Cons

− Only works bound to an evohome controller
− No display or local temperature control
− Won’t work with Resideo’s newer evohome R3 controller (EMEA)

Which Version Should You Buy?

✓HR91 single — 1 x HR91 radiator controller (Resideo code HR91). The button links to an Amazon listing for the HR91EE, a code that Resideo’s UK warranty list names alongside the HR91. Check latest price at Amazon
✓HR91 pack of 4 — 4 x HR91 radiator controllers (Resideo code HR914). The button links to an Amazon listing for the HR914EE, a code that Resideo’s UK warranty list names alongside the HR914. Check latest price at Amazon

Good to Know

The HR91 only works bound to an evohome controller, so you need an evohome system to use it. Resideo’s UK installation guide lists it as a radiator controller for the evohome Controller (ATC928). Resideo’s guide for its newer evohome R3 controller, published for EMEA, says the older HR92 and HR91 controllers will not work with that version of evohome controller.

Resideo also sells the HR91 in the evohome Essentials Pack (ATP926G3001), which it lists as a controller, 6 x HR91 and a receiver.

Setup & Installation

Resideo’s evohome installation guide says to set up the zone on the evohome Controller first (unless you are following guided configuration): press and hold Settings for 3 seconds, press the green tick, press ADD ZONE, type a name for the zone and press the green tick, then press RADIATOR VALVE, and press YES if you want the evohome Controller (which needs to be in that zone) to control the zone temperature, otherwise press NO. It says you must repeat these steps for each radiator controller. Then, on the HR91 itself: remove the top cover, open the battery clip and insert the AA batteries supplied, then close the clip and replace the cover. Press the Binding button for 5 seconds. The LED flashes amber for up to 2 minutes while binding, and successful binding is confirmed by the LED showing continuous green for 5 seconds. You should then see a SUCCESS message on the evohome Controller; if not, go back and bind it again. Then press the green tick to add another radiator to the zone, or the red cross if you don’t need to add another.

To check the radio signal, Resideo’s guide has you press and hold two buttons for 5 seconds, until both LEDs flash amber, then press the tick on the evohome screen to start the test. Signal strength is shown on the controller from poor to excellent, and the test exits automatically after 10 minutes.

Common Problems & Fixes

Running into issues? Our Honeywell Home troubleshooting guide covers step-by-step fixes taken from Resideo’s own support pages, including won’t fit the radiator valve and won’t bind to evohome.

Who Should Buy It

Anyone with an evohome controller (not the newer evohome R3) who wants screenless radiator controllers with a child lock and an open window feature.

Verdict

The Honeywell Home HR91 is a screenless evohome radiator controller with a two-year battery life, a child lock and an open window feature. It only works bound to an evohome controller, so check your system first.

As an Amazon Associate I earn from qualifying purchases.

Need a hand with this?

If a radiator valve is seized, damaged or leaking, a heating engineer can look at it. Any work on the boiler itself must be done by a Gas Safe registered engineer. You can compare up to 3 quotes from local heating engineers.

We may earn a commission if you request quotes through this link, at no cost to you.

⚠️ Important: This page is for guidance only. Heating systems vary. If a radiator valve is seized, damaged or leaking, stop and contact a heating engineer. Follow Honeywell Home’s official guidance for your device.