PoE Floodlight Camera 16MP
Reolink Elite Pro Floodlight PoE Review

16MP  |  180° view  |  2,800 lumens  |  PoE only  |  IP66

Overview

The Reolink Elite Pro Floodlight PoE is a 180° floodlight camera at 7680 x 2160 (16MP). Its 17W floodlight gives 2,800 lumens with an adjustable 3000K to 6500K colour temperature, and it has infrared up to 30 metres for black and white night vision.

It is powered by PoE only, with no DC power port. Reolink’s spec table lists IEEE 802.3af, but its product page recommends a PoE switch that supports 802.3at with at least 25W per port. Reolink lists two-way audio, a 105dB siren, microSD up to 512GB and Reolink NVR support. It is rated IP66.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓7680 x 2160 (16MP), 180° horizontal
✓17W floodlight, 2,800 lumens, 3000K to 6500K
✓Infrared up to 30 metres
✓PoE only, no DC port (Reolink recommends 802.3at, 25W per port)
✓Two-way audio and 105dB siren
✓microSD up to 512GB and Reolink NVR
✓Google Assistant (Reolink’s page also describes Alexa)
✓IP66

Pros & Cons

Pros

+ Bright 2,800-lumen floodlight
+ 16MP across 180°
+ Power and data on one network cable
+ Loud 105dB siren

Cons

− PoE only, with no DC option
− Reolink recommends an 802.3at switch with 25W per port
− High-power camera, which uses more of an NVR’s PoE power

Setup & Installation

Run a network cable from a PoE switch, PoE injector or Reolink NVR to the camera. Reolink says cameras with smart detection should not point straight down at the ground, and to avoid areas heavily blocked by trees. Reolink recommends a PoE switch that supports IEEE 802.3at with at least 25W per port.

If your router has no PoE ports, use a PoE switch or injector. To record around the clock, pair it with a Reolink NVR; it can also record to its own microSD card.

Common Problems & Fixes

Running into issues? Our Reolink Elite Pro Floodlight PoE troubleshooting guide has step-by-step fixes taken from Reolink’s own support pages, including offline, not detected by NVR, keeps disconnecting.

Who Should Buy It

Anyone who wants a bright floodlight and a wide 16MP view on a wired Reolink system, without mains wiring at the camera.

Verdict

The Elite Pro Floodlight PoE combines Reolink’s 16MP panoramic picture with a 2,800-lumen floodlight on one network cable. Plan the PoE power first: Reolink recommends an 802.3at switch.

As an Amazon Associate I earn from qualifying purchases.

Need a hand with this?

If the wiring, transformer or power supply is beyond a DIY job, it is worth having a qualified electrician look at it. You can compare up to 3 quotes from local electricians.

We may earn a commission if you request quotes through this link, at no cost to you.

⚠️ Important: This page is for guidance only. Always turn off the power at the circuit breaker or fuse box before touching any wiring, and use a qualified electrician if you are not sure. Follow Reolink’s official guidance for your device.
🎯 Which camera is right for you?
A few quick questions, instant matches.
Find My Camera →