If your Ring Peephole Camera 2K is showing this problem, working through the checks below in order will resolve it in the large majority of cases.

What This Problem Means

The Ring Peephole Camera 2K cannot establish or maintain a Wi-Fi connection. This prevents live view, motion alerts and remote access from working.

Common Symptoms

• Camera shown as offline in the Ring app
• Setup fails at the Wi-Fi connection step
• Camera connects briefly then drops off again
• Flashing or unusual LED behaviour during setup

Safe Checks You Can Try

1. Restart the camera and router

Remove the Quick Release Battery Pack from the back of the camera, wait 10 seconds, then reinsert it. The camera will restart automatically. Also restart your router by unplugging it for 30 seconds. Restart your router by unplugging it for 30 seconds. Wait 2 minutes before attempting to reconnect in the Ring app.

2. Check Wi-Fi signal strength

Move the Ring Peephole Camera 2K closer to your router temporarily and try connecting. If it connects when close, the installation location has too weak a signal. A Wi-Fi extender between the router and camera will resolve this.

3. Confirm the Wi-Fi band

The Ring Peephole Camera 2K connects on 2.4GHz only. If your router merges 2.4GHz and 5GHz under one network name, try separating them in your router settings and connecting the camera specifically to the 2.4GHz network.

4. Re-enter Wi-Fi credentials

If your Wi-Fi password has changed recently, the camera will not reconnect automatically. Open the Ring app, go to Device Settings and select Change Wi-Fi Network to re-enter the correct password.

5. Check router security settings

Ensure your router does not have MAC address filtering or device isolation enabled. WPA2 or WPA3 security is recommended for Ring cameras.

When To Contact Support

If the issue persists after working through all the checks above, contact Ring support for further help. Your device may be eligible for a replacement if it is within its one-year warranty.