Tapo RV20 Max Plus Auto-Empty Not Working? Here’s How to Fix It

Step-by-step fix guide | Tapo RV20 Max Plus

Try this first — Check the bag is not full: Tapo says the dock does not warn you.

If the Tapo RV20 Max Plus dock does not empty the robot, these are Tapo’s checks.

What This Problem Means

The dock is not pulling dirt out of the robot’s bin.

Common Symptoms

  • The bin is still full after docking
  • No emptying noise
  • Emptying stops partway

Safe Checks You Can Try

1. Know when it empties

Tapo’s robot vacuum FAQ says auto-empty runs after cleans longer than 30 minutes, and no more than 3 times in 10 minutes.

2. Check the bag

Tapo says the dock does not warn you when the bag is full; the app reminds you after 30 empties. Fit a new bag if it is full.

3. Check the dock light

Tapo says the dock light turns off after 10 minutes idle, which is normal.

4. Check the robot is docked properly

Line the robot up on the dock so it can empty, and clear any blockage from the bin opening.

Helpful accessory: Tapo RVA202 Dust Bags (RV20/RV30) — replacement dock bags for the RV20 and RV30.
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If none of these checks fix it, contact Tapo support through TP-Link’s UK support site, with the model and hardware version from the label on the device.