Robot Vacuum and Mop with Multifunctional Dock
Roborock Qrevo 2 Pro Review

Up to 25,000Pa suction  |  PreciSense LiDAR  |  15 mm mop lift  |  Mop wash up to 75°C  |  Auto-empty up to 65 days

Overview

The Roborock Qrevo 2 Pro is a robot vacuum and mop with auto mop removal. Roborock’s headline suction figure is 25,000Pa HyperForce, it maps with PreciSense LiDAR, and structured-light sensors detect and avoid everyday obstacles.

Its two spinning mops turn at up to 200 RPM, lift 15 mm on carpet, and a FlexiArm extending mop reaches into edges. The robot can leave its mops in the dock for carpet cleaning. The dock empties the robot for up to 65 days into a self-sealing bag, washes the mops with water up to 75°C, dries them with 45°C warm air and refills the robot’s tank, and its cleaning tray can go up to 170 days between cleans. The 5,200mAh battery charges from 15% to full in under 4 hours, and the robot works with Alexa, Siri, Google Home and Matter.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓25,000Pa HyperForce suction (Roborock’s headline figure)
✓PreciSense LiDAR; structured-light obstacle avoidance
✓Dual spinning mops, 200 RPM, 15 mm lift
✓FlexiArm extending edge mop; auto mop removal
✓Dock: auto-empty up to 65 days, mop wash up to 75°C, 45°C drying, auto refill
✓Cleaning tray maintenance interval up to 170 days
✓Carpet Boost+ and Deep Carpet Cleaning
✓5,200mAh battery, under 4 hours to charge
✓Alexa, Siri, Google Home and Matter

Pros & Cons

Pros

+ Matter supported now
+ Hot-water mop wash up to 75°C
+ Extending mop for edges
+ Mops lift 15 mm on carpet

Cons

− No RGB camera listed for obstacle recognition
− Roborock’s pages quote two suction figures
− Taller than the Qrevo Edge and Curv robots (9.66 cm)

Setup & Installation

Place the dock on a hard, flat floor (wood, tile or concrete) flat against a wall, leaving at least 0.82 m of height, 0.42 m of width and 1.2 m of space in front. Fill the clean water tank with cold water only. Download the Roborock app, tap “Add Device” or “+” and follow the in-app guide. The robot connects on 2.4GHz Wi-Fi only, so choose your 2.4GHz network.

Turn on Auto Mop Removal in the app if you want the robot to leave its mops in the dock for carpet cleaning.

Common Problems & Fixes

Running into issues? Our Roborock troubleshooting guide covers step-by-step fixes taken from Roborock’s own manuals and support pages, including won’t connect to Wi-Fi, not charging, mop wash or drying not working.

Who Should Buy It

Anyone who wants a full-featured dock with hot-water washing, auto refill and Matter, and does not need camera-based obstacle recognition.

Verdict

The Qrevo 2 Pro covers the essentials well: a hot-water mop wash, an extending edge mop, 15 mm mop lift and Matter. For camera-based obstacle avoidance and a slimmer robot, look at the Qrevo Edge 2.

As an Amazon Associate I earn from qualifying purchases.