Robot Vacuum and Mop with RockDock Ultra 2.0
Roborock Saros 10 Review

22,000Pa suction  |  RetractSense LDS navigation  |  VibraRise 4.0 vibrating mop  |  Mop wash up to 80°C  |  60°C heated-air drying

Overview

The Roborock Saros 10 is a robot vacuum and mop that Roborock presents as its upgrade from the S8 MaxV Ultra. It has 22,000Pa HyperForce suction and RetractSense navigation, where the LDS laser lowers for low spaces, so the robot is 7.98 cm tall with the laser down and 9.35 cm with it raised. ReactiveAI 3.0 uses front triple structured light, an RGB camera and VertiBeam lateral structured light to avoid obstacles.

It mops with VibraRise 4.0, a vibrating mop with two sonic zones at 4,000 times a minute each and up to 8N of pressure, plus a separate side mop that spins at up to 220 RPM and drops down only at edges. The mop detaches in the Vacuum Only modes. The RockDock Ultra 2.0 empties the robot, washes the mop with water up to 80°C, dries it with 60°C heated air, refills the robot’s water tank and adds detergent automatically. The AdaptiLift chassis lifts up to 10 mm on high-pile carpet, and the robot works with Google Home and Alexa, with Matter (including Apple Home) coming in an update.

Ad: we earn commission if you buy through the price buttons on this page. As an Amazon Associate I earn from qualifying purchases.

Check latest priceat Amazon

Key Features

✓22,000Pa HyperForce suction
✓RetractSense LDS: 7.98 cm tall with the laser lowered
✓ReactiveAI 3.0: triple structured light, RGB camera, VertiBeam
✓VibraRise 4.0 vibrating mop, 4,000 times/min, up to 8N
✓Edge mop up to 220 RPM that lowers only at edges
✓Dock: auto-empty, mop wash up to 80°C, 60°C heated-air drying, refill, auto detergent
✓AdaptiLift chassis lifts up to 10 mm on high-pile carpet
✓6,400mAh battery with 150-minute fast charging
✓Offline voice assistant; Google Home and Alexa; Matter by update

Pros & Cons

Pros

+ Vibrating mop plus a dedicated edge mop
+ Hottest drying in the Saros range (60°C)
+ Lowers its laser for low furniture
+ Quiet mopping (52 dB(A))

Cons

− Plumbed-in water refill and drain only on the separate Refill and Drainage version
− Matter support is still to come by update
− Lower suction than the Saros 20

Setup & Installation

Place the dock on a hard, flat floor against a wall, leaving at least 0.8 m of height, 0.42 m of width and 1 m of space in front. Fill the clean water tank with cold tap water only. Download the Roborock app, tap “Add Device” or “+” and follow the in-app guide. The robot connects on 2.4GHz Wi-Fi only, so choose your 2.4GHz network.

For hot-water washing, check Washing Water Temperature is set to Hot Water in the app, and turn on the Auto-Detach/Reinstall Mop Cloth Mounts feature if you want the mop to come off for vacuum-only jobs. The AdaptiLift carpet lift is activated manually in the app.

Common Problems & Fixes

Running into issues? Our Roborock troubleshooting guide covers step-by-step fixes taken from Roborock’s own manuals and support pages, including won’t connect to Wi-Fi, not charging, mop wash or drying not working.

Who Should Buy It

Anyone upgrading from an S8 MaxV Ultra, or who prefers a vibrating mop to spinning pads, with a dock that washes hot and dries warm.

Verdict

The Saros 10 is Roborock’s vibrating-mop flagship, with a mop wash up to 80°C, 60°C drying and a laser that drops for low furniture. If you want spinning mops and higher suction, look at the Saros 20.

As an Amazon Associate I earn from qualifying purchases.