🔄 Try this first — Press and hold the power/reset button on the camera for about 5 seconds until you hear a prompt tone, then release. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds too.

If your Reolink Solar Floodlight Cam is showing as offline, the checks below will resolve the issue in the large majority of cases.

What This Problem Means

When the Reolink Solar Floodlight Cam goes offline it loses its connection and stops sending alerts or streaming video. This is almost always a power or Wi-Fi issue rather than a hardware fault.

Common Symptoms

  • Red or no indicator light on the device
  • No motion alerts being received
  • Live View fails to connect
  • Device shown as offline in the Reolink app
  • Last event shown in the app was some time ago

Safe Checks You Can Try

1. Check the power supply

Confirm the Reolink Solar Floodlight Cam is receiving power. Check the wiring connections and confirm the power adapter or transformer is delivering the correct voltage.

2. Restart the device and router

Press and hold the power/reset button on the camera for about 5 seconds until you hear a prompt tone, then release. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds too. Restart your router by unplugging it for 30 seconds.

3. Check Wi-Fi signal strength

In the Reolink app, check the Wi-Fi signal strength. Below two bars and you may experience regular dropouts. A Wi-Fi extender near the front door will improve stability.

4. Check for network changes

If your Wi-Fi password or router has changed recently, reconnect the device in the Reolink app under Device Settings.

🔧 Helpful accessory: Find compatible accessories on Amazon
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If the issue persists after working through all the checks above, contact Reolink support for further help. Your device may be eligible for a replacement if it is within its two-year warranty.