Tapo RV50 Omni Auto-Empty Not Working? Here’s How to Fix It

Step-by-step fix guide | Tapo RV50 Omni

Try this first — Check the bag is not full: Tapo says the dock does not warn you.

If the Tapo RV50 Omni dock does not empty the robot, these are Tapo’s checks.

What This Problem Means

The dock is not pulling dirt out of the robot’s bin.

Common Symptoms

  • The bin is still full after docking
  • No emptying noise
  • Emptying stops partway

Safe Checks You Can Try

1. Know when it empties

Tapo’s robot vacuum FAQ says auto-empty runs after cleans longer than 30 minutes, and no more than 3 times in 10 minutes.

2. Check the bag

Tapo says the dock does not warn you when the bag is full; the app reminds you after 30 empties. Fit a new bag if it is full.

3. Check the dock light

Tapo says the dock light turns off after 10 minutes idle, which is normal.

4. Check the station

Tapo’s RV50 guide says to check the bag is fitted and not full, the dustbin is seated with its vent clear, the robot is lined up on the station, and the path to the bag (especially the station inlet) is clear.

Helpful accessory: Tapo RVA210 Dust Bags (RV50) — replacement station bags for the RV50 series.
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If none of these checks fix it, contact Tapo support through TP-Link’s UK support site, with the model and hardware version from the label on the device.