Blink Wired Floodlight Camera Lights Not Working? Here’s How to Fix It
The floodlights turn on automatically when motion is detected, or you can control them manually from the app. If they will not light, check the app settings, motion and the wiring.
What This Problem Means
If your Blink Wired Floodlight Camera is showing this fault, working through the checks below in order will resolve it in the large majority of cases. Each step is safe to try yourself and is based on Blink’s official guidance.
Common Symptoms
- Lights do not come on with motion
- Cannot toggle lights in the app
- Lights stay off (or stuck on)
- Camera works but lights do not
Safe Checks You Can Try
1. Check the light settings
In the Blink app, confirm the lights are enabled and try toggling them on manually.
2. Confirm motion detection is on
Motion-activated lighting only works when the system is armed and Motion Detection is on.
3. Check the power and wiring
Make sure the correct breaker is on. The Wired Floodlight Camera needs a ground wire to operate — if your wiring differs, consult an electrician.
4. Short-press the reset button
A short press (under 5 seconds) of the reset button on top of the camera resolves most glitches.
5. Confirm the camera is online
If the camera itself is offline, the lights will not respond — get it back online first.
6. Check the mounting orientation
An arrow on the back label shows the correct mounting direction; incorrect mounting affects motion-triggered lighting.
As an Amazon Associate I earn from qualifying purchases.
When To Contact Support
If you have worked through every step and your Blink Wired Floodlight Camera still has this problem, the hardware may need attention. Visit Blink support for further help or to arrange a replacement if your device is in warranty.