🔄 Try this first — Press and hold the power button on the back of the doorbell for about 5 seconds until you hear a prompt tone, then release. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds too.

If your Reolink Video Doorbell (Battery) battery is draining faster than expected, working through the checks below will resolve the issue in most cases.

What This Problem Means

The Reolink Video Doorbell (Battery) battery is depleting faster than expected. Battery-powered cameras are designed to last weeks or months between charges, but high motion activity, poor Wi-Fi signal and cold weather can significantly reduce battery life.

Common Symptoms

  • Battery depletes within days rather than weeks
  • Frequent low battery notifications
  • Camera goes offline due to low charge
  • Battery not lasting as long as it used to

Safe Checks You Can Try

1. Reduce motion sensitivity and zones

Open the Reolink app and go to Motion Settings. Tighten motion zones to exclude roads and high-traffic areas beyond your property. Reduce sensitivity. Each motion event uses battery power.

2. Check Wi-Fi signal strength

A weak Wi-Fi signal causes the camera to work harder to maintain its connection, draining the battery faster. Improve signal with a Wi-Fi extender.

3. Disable Snapshot or Scheduled Capture

If any scheduled capture or snapshot feature is enabled, disable it or reduce the frequency to save battery.

4. Check operating temperature

Reolink batteries drain faster in cold weather below 0°C. Reduced performance in winter is expected, not a fault.

🔧 Helpful accessory: Find a Reolink Solar Panel on Amazon
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If the issue persists after working through all the checks above, contact Reolink support for further help. Your device may be eligible for a replacement if it is within its two-year warranty.