🔄 Try this first — Press and hold the power button on the back of the doorbell for about 5 seconds until you hear a prompt tone, then release. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds too.

If your Reolink Video Doorbell (Battery) will not connect to Wi-Fi, working through the checks below in order will resolve it in the large majority of cases.

What This Problem Means

The Reolink Video Doorbell (Battery) cannot establish or maintain a Wi-Fi connection. This prevents live view, motion alerts and remote access from working. It is almost always a signal strength, network configuration or credential issue.

Common Symptoms

  • Device shown as offline in the Reolink app
  • Setup fails at the Wi-Fi connection step
  • Device connects briefly then drops off again
  • Weak or no Wi-Fi signal shown in Device Settings
  • Spinning or flashing indicator light during setup

Safe Checks You Can Try

1. Restart the device and router

Press and hold the power button on the back of the doorbell for about 5 seconds until you hear a prompt tone, then release. Wait 60 seconds for it to restart fully. Restart your router by unplugging it for 30 seconds too. Restart your router by unplugging it for 30 seconds. Wait 2 minutes before attempting to reconnect in the Reolink app.

2. Check Wi-Fi signal strength

Move the Reolink Video Doorbell (Battery) closer to your router temporarily and try connecting. If it connects when close, the installation location has too weak a signal. Add a Wi-Fi extender between the router and the camera.

3. Check the Wi-Fi band

The Reolink Video Doorbell (Battery) connects on 2.4GHz only. If your router merges both bands under one network name, try separating them in your router settings and connecting the camera specifically to the 2.4GHz network.

4. Re-enter Wi-Fi credentials

If your Wi-Fi password has changed recently, the camera will not reconnect automatically. In the Reolink app, go to Device Settings and select Change Wi-Fi Network to re-enter the correct password.

5. Check router security settings

Ensure your router does not have MAC address filtering or device isolation enabled. WPA2 or WPA3 security is recommended. Some older WEP security settings are not supported.

🔧 Helpful accessory: Find compatible accessories on Amazon
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If the issue persists after working through all the checks above, contact Reolink support for further help. Your device may be eligible for a replacement if it is within its two-year warranty.