Is your Nest Thermostat (2020) not turning on your air conditioning or cooling system when it should? Here are the checks you can safely carry out before contacting support. Note that most UK homes do not have cooling connected to their thermostat.
What This Problem Means
The thermostat is not successfully calling for cooling. This can be caused by a temperature setting, the system mode being set incorrectly, or a wiring or compatibility issue.
Common Symptoms
- Cooling does not activate when the room is warmer than the target
- The system mode may be set to Heat only
- The cooling symbol does not appear on the display
- Air conditioning does not respond to the thermostat
Safe Checks You Can Try
1. Check the System Mode
On the Nest Thermostat (2020), check the system mode is set to Cool or Heat-Cool rather than Heat only or Off.
2. Check the Target Temperature
Set the target temperature lower than the current room temperature.
3. Check Your Cooling System Is Powered
Confirm your air conditioning unit is switched on at its own power supply.
4. Restart the Thermostat
Press and hold the right-hand side of the thermostat display for about 10 seconds until it restarts. Allow it to restart, then test cooling again.
5. Check Cooling Compatibility
If your Nest Thermostat (2020) was installed for heating only, the cooling wires may not be connected. A qualified HVAC engineer can confirm.
🛒Need a spare part? Find compatible parts for your Nest Thermostat (2020) on AmazonCheck Parts
When To Contact Support
If you have worked through the checks above and the issue persists, contact Google Nest support at https://support.google.com/googlenest. For heating system faults that do not resolve, consult a qualified heating engineer — the Nest Thermostat (2020) works with your existing boiler wiring and a heating professional can check the connections safely.
🔨 Nest Thermostat (2020) problems · Nest Thermostats hub · Review · All Smart Home Devices
