🔄 Try this first — Switch off the circuit breaker or fuse supplying the floodlight camera for 10 seconds, then switch it back on. Wait 60 seconds for the camera to restart fully. Also restart your router by unplugging it for 30 seconds.

If your Ring Floodlight Cam (2nd Gen) is showing this problem, working through the checks below in order will resolve it in the large majority of cases.

What This Problem Means

Poor video quality from the Ring Floodlight Cam (2nd Gen) is almost always caused by a weak Wi-Fi signal, slow internet upload speed or a dirty lens rather than a camera fault.

Common Symptoms

  • Video appears blurry, pixelated or low resolution
  • Image is grainy, especially at night
  • Video stutters or drops frames
  • Colours appear washed out or incorrect

Safe Checks You Can Try

1. Check Wi-Fi signal strength

A weak Wi-Fi signal causes the camera to reduce video quality to maintain the connection. Check the signal strength in the Ring app and add a Wi-Fi extender if needed.

2. Check your internet upload speed

Test your upload speed at fast.com. The Ring Floodlight Cam (2nd Gen) requires at least 5 Mbps for optimal 2K (2560×1440) video. Below this, the stream will automatically reduce quality.

3. Clean the lens

Dust, condensation, cobwebs or fingerprints on the lens are the most common cause of blurry video. Clean the lens with a soft, dry cloth.

4. Check video quality settings

In the Ring app go to Device Settings and check the video quality setting. Ensure it is set to the highest available option for your connection.

🔧 Helpful accessory: Find compatible accessories on Amazon
As an Amazon Associate I earn from qualifying purchases.

When To Contact Support

If the issue persists after working through all the checks above, contact Ring support for further help. Your device may be eligible for a replacement if it is within its one-year warranty.