Ring Indoor Camera Plus Won’t Connect to WiFi
Is your Ring Indoor Camera Plus failing to connect to wifi during setup or after a network change? Here are the checks you can safely carry out before contacting support.
What This Problem Means
The Ring Indoor Camera Plus cannot establish a stable wifi connection. The most common causes are an incorrect wifi password, the camera being too far from the router during setup, or the router serving only a 5GHz band the camera cannot see.
Common Symptoms
- Setup stalls or fails at the wifi stage in the Ring app
- The camera connects briefly then drops offline
- Device Health reports a weak or failed connection
- The Ring app cannot find the camera after a router or ISP change
Safe Checks You Can Try
1. Check Your Wifi Password
Re-enter your wifi password carefully. It is case sensitive, so watch for capital letters and special characters. It is often printed on the bottom or side of your router.
2. Use a 2.4GHz Network
Ring cameras connect to 2.4GHz wifi. If your router broadcasts 2.4GHz and 5GHz under one name, give each band its own name, or connect to the dedicated 2.4GHz network during setup.
3. Move Closer During Setup
Bring the camera within 3 metres of your router to complete setup, then return it to its spot. Setting up at distance is a frequent cause of failure.
4. Restart Router and Camera
Unplug your router for 30 seconds and plug it back in. Once it has fully reconnected, unplug the camera for 30 seconds and attempt setup again.
5. Reconnect in the Ring App
If you changed your network name, password, ISP or router, reconnect via Device Health then Reconnect to Wifi, entering your updated details.
When To Contact Support
If you have worked through the checks above and the issue persists, contact Ring support at https://ring.com/gb/en/support. Have your device serial number ready — find it in Device Health in the Ring app.
🔨 Ring Indoor Camera Plus problems · Ring Cameras hub · Ring Indoor Camera Plus review · All Smart Home Devices